Craftsman 172.26729 operating instructions Description, Know Your Planer

DESCRIPTION

KNOW YOUR PLANER

NOTE: Before attempting to use your planer, familiarize yourself with all of the operating features and safety requirements.

Your planer has a precision-built electric motor and it should be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate on direct current (DC). The large voltage drop will cause a loss of power and the motor will overheat. If the planer does not operate when plugged into correct 120-volt, 60-Hz AC ONLY outlet, check the power supply. This planer has a 10-ft., 2-wire power cord (no adapter needed).

This Professional Planer has the following features:

1.Powerful, heavy-duty7-Amp motor provides high speed needed for fast, clean cuts in most any type of wood. Precision balanced for smooth, quiet operation.

2.Low profile depth-of-cut control knob allows easy depth-of-cut adjustments from 0 to 1/8-in.

3.Grooved front shoe design for 45° bevel or chamfer cuts.

4.Ergonomically designed contoured top-mount handle and front assist handle with soft grips for positive gripping, balance, control and comfort.

5.Heavy-duty extended length trigger switch conveniently located for comfort and control. Lock-off button helps prevent accidental starts.

6.31/4-inch cutting width for fast planing. Planes wide side of 2 X 4 board in one pass.

7.Uses reversible, double-edged hardened steel carbide-tipped blades that can be used on both sides for longer blade life.

8.Includes edge guide for accurate, precise cuts on long or uneven workpieces.

9.Includes rabbet guide for making 15/16-in. deep rabbet cuts.

10.Chip chute keeps work surface clean and directs wood chips away from operator.

11.Permanently lubricated bearings for smooth, efficient operation and long life.

12.Cogged timing belt drive provides positive, precise power transmission.

13.High-impact plastic motor housing and handles help protect tool from damage and reduce weight.

14.Includes high-impact resistant storage / carrying case.

DESCRIPTION cont.

This Professional Planer has the following features:

Fig. 1	Trigger Switch	Rear Handle
	Left or Right
	Dust/ Chip
	Extraction

On/Off

Button

Front
Handle		3/64
	0	1/32
		1/64
	Depth Adjustment		Base plate stand
		Knob
PRODUCT SPECIFICATIONS
Input		7 Amps
Cutting Width		3 1/4 in.
Cutting Depth		0 to 1/8-in.
Max. Rabbet Cut		15/16-in.
Rating		120 volts, 60 Hz AC
No-Load Speed		12,000 RPM

10 11