Metabo HC 300 manual Accessories for the COMBO-MACHINES, For Sawing, For Planing

COMBO-MACHINES

ACCESSORIES FOR THE COMBO-MACHINES

Wheel sets

	Order no.
Wheel set	0920054102
For easy transportation
Suitable for: Multi 310
Table length extensions
	Order no.
Table length extension	0920053947
For the secure
supporting of
long workpieces
With height-adjustable
support leg
Eccentric clamp:
easy to mount
and dismount
Can be mounted
at the front or
the rear
Suitable for: Multi 260
Length: 1.000 mm
Width: 150 mm
FOR SAWING
Sliding table width extensions
	Order no.
Sliding table width extension	0920054072
For enlarging the
supporting surface
Mounted and dismounted
without tools
Length: 350 mm
Width: 262 mm

Length guides

	Order no.
Length guide	0920054110
For use with the
cross-cut guide of
the sliding table
Enables the cutting
to length of workpieces
of up to 1,700 mm
Extractable
Length 1,100 mm

Circular saw blades

Top cutting results thanks to teeth ground on all sides and high accuracy of flatness and concentric running

Tungsten carbide blades: long tool life thanks to use of unmixed carbide

Can be reground repeatedly Made in Germany

Material	Dimensions	Tooth	Version	Order no.
	mm	pitch
Tungsten	250 x 2,8 x 30	24	Alternately bevel-	6.28012
carbide			ground tips
Tungsten	250 x 2,8 x 30	34	Alternately bevel-	6.28045
carbide			ground tips,
			Combo secondary
			hole holder
Tungsten	250 x 2,8 x 30	42	Alternately bevel-	6.28046
carbide			ground tips,
			Combo secondary
			hole holder
Tungsten	250 x 2,8 x 30	60	Alternately bevel-	6.28049
carbide			ground tips,
			Combo secondary
			hole holder
Tungsten	250 x 3,2 x 30	60	Alternately bevel-	6.28050
carbide			ground tips,
			Combo secondary
			hole holder
Tungsten	250 x 2,8 x 30	80	Alternately bevel-	6.28087
carbide			ground tips,
			Combo secondary
			hole holder
Tungsten	250 x 2,8 x 30	80	Flat tooth/	6.28088
carbide			trapezoidal
			tooth,
			5° negative

FOR PLANING

HSS planer blade

For all soft woods and hard woods Regrindable

18% tungsten = increased tool life

Dimensions	Suitable for	Packing unit	Order no.
mm
260 x 20 x 2,5	Multi 260	2	0920054030
310 x 20 x 2,5	Multi 310	2	0920054048
Planer blade adjusting devices
			Order no.
	Planer blade adjusting device		0911016397
	Suitable for all blade shafts

Simple handling and exact cutter projection

In wooden case

Scope of delivery:

2 magnet planer blade adjusting devices,

3 setting plates for blade excess length

Push block

	Order no.
Push block	0911060213
For the safe feed of short
workpieces while planing

290