Global Machinery Company 3BVSIPCF manual

•Gouging at start – as caused by the edge of one or all blades not protruding enough in relation to the rear base line.

(a) (b)

•Gouging at end – as caused by the edge of one or all blades protruding too far in relation to the rear base line.

(A)front base (moveable shoe)

(B)rear base (stationary shoe)

Reinstalling the planer barrel 1. Place the planer on its side.

2. Raise the drum guard.

3.Slide the planer barrel into the housing, lining up the blade barrel with the spindle.

4.Press in the drum spindle lock button (21) and rotate the barrel (10) until the barrel is locked into place. Continue to hold the in the lock in button until the new barrel has been tightly secured.

Note: the blade barrel has two lock out positions.

5.Re-insert the large washer, adjusting its position so that the spindle end passes through the centre. Now insert the smaller washer followed by the hex head screw.

WARNING. If the larger washer is not correctly orientated the drum cannot be firmly secured.

6.Hand screw the hex head screw clockwise to close the gap between the washers and hex head screw.

7.Once the screw has been hand tightened, use the Allen key (25) to further tighten until the barrel is secured.

8.Release the spindle lock and close the drum guard.

Your power tool is now ready to recommence planing again.

Note: Blades must be set correctly or the workpiece will end up rough and uneven. The blades must be mounted so that the cutting edge is absolutely level. i.e. Parallel to the surface of the rear base. Refer to the Correct blade setting section in this instruction manual prior to planing when installing new planer blades or a new planing barrel configuration.

Removing the planer barrel and installing a sanding barrel

Note. Sanding drum sold separately.

Your planer has been fitted with a removable drum feature for an additional sanding drum, this allows you to convert your planer into a drum sander with ease, by following the below instructions:

Note: Dependent on what sanding grit barrel has been selected, the powertool can be used when sanding wood, metal, plastic and similar materials. It is used mainly for quickly removing a large amount of material. Do not use this sander for sanding steel or magnesium.

CAUTION. Always ensure that the tool is switched off and unplugged from the power supply before installing or removing the drum.

Removing the planer barrel

Note: Refer back to earlier in the Instruction Manual for detailed information (page 8).

1.Place the planer barrel on its side.

2.Raise the drum guard so that the Hex Head screw located on the blade barrel is exposed.

3BVSIPCF specifications

Global Machinery Company 3BVSIPCF has established itself as a leading innovator in the field of industrial machinery. With a focus on advanced engineering and cutting-edge technology, the company has developed a diverse range of products designed to meet the needs of various industries, including construction, manufacturing, and logistics.

One of the standout features of 3BVSIPCF is its commitment to sustainability. The company has made significant strides in creating environmentally friendly machinery that reduces waste and promotes energy efficiency. Incorporating eco-friendly materials and designs, their machinery not only meets stringent environmental standards but also helps businesses reduce their carbon footprint.

In terms of technology, 3BVSIPCF utilizes state-of-the-art automation and robotics in its machinery. This integration allows for higher precision, increased productivity, and reduced labor costs. The company’s use of Artificial Intelligence (AI) and Machine Learning (ML) enables smarter operations, optimizing processes through predictive maintenance and real-time data analysis. This technological edge positions 3BVSIPCF as a pioneer in smart manufacturing.

Another key characteristic of Global Machinery Company is its adaptability. With an extensive research and development program, 3BVSIPCF continuously evolves its product line to cater to changing market demands. The company engages closely with clients to understand their specific requirements, allowing them to deliver customized machinery solutions that enhance efficiency and performance in diverse environments.

User-friendly interfaces are also a hallmark of 3BVSIPCF’s machinery. The outstanding design emphasizes ease of operation, enabling workers with varying skill levels to interact with complex systems effectively. Coupled with comprehensive training programs, this ensures that clients can maximize the benefits of their investment in machinery.

Finally, Global Machinery Company 3BVSIPCF stands out for its global reach and strong customer support network. With dedicated service teams across various regions, clients can expect prompt and knowledgeable assistance, ensuring the longevity and efficiency of their machinery operations.

In summary, Global Machinery Company 3BVSIPCF combines sustainability, advanced technology, adaptability, user-friendliness, and robust support to deliver exceptional industrial machinery to markets worldwide. This holistic approach solidifies its reputation as a trusted leader in the field, helping businesses thrive in an increasingly competitive landscape.