Sanding

2.Run the planer along the workpiece.

3.Once you have finished planing the section take the pressure off the drum guard release lever (23) and make sure that the drum guard (22) is full covering the barrel/drum.

CAUTION: Do not raise the drum guard if it is not performing a full/unlimited rebate application.

WARNING: If the drum guard does not completely close immediately stop using the power tool and have the unit serviced by a qualified service agent. If you use the product with a defective blade drum guard the manufacturer will not be held liable for any damage or personal injury caused.

Note: The workpiece will automatically raise the blade drum guard automatically when rebating up to 45mm (the height of the pivot point of the drum guard) timbers.

Note. Do not apply too much force on the lever, excess pressure may cause blade guard to break.

Note. Sanding drum not supplied.

Dependent on what sanding grit barrel has been selected, the powertool can be used when sanding wood, metal, plastic and similar materials. It is used mainly for quickly removing a large amount of material. Do not use this sander for sanding magnesium or steel.

Note: When sanding ensure that the depth adjustment dial is set on the ‘O’ setting.

To achieve the best sanding result with this power tool the following instructions and tips should be adhered to.

1.Prior to commencing the sanding application, ensure that the sanding barrel

is in good condition and fixed tightly.

WARNING. Variable speed should be 1-6 when sanding. Never on ‘Max this will cause it to vibrate and possibly cause an injury.

2.Check to make sure that the planning depth adjustment dial (3) is set to the ‘O’ height setting.

3.Bring the sander onto the work piece and apply light pressure.

4.Pull up the trigger switch (1) and set the variable speed at 1-6 before moving it across the work.

5.Sand with the grain, in parallel overlapping strokes.

6.Adjust the variable speed dial as required.

7.To remove paint or smooth very rough wood, sand across the grain in 45º in two directions, and then finish the parallel with the grain.

8.Lift the sander off the work before switching it off.

9.Remember to keep your hands away from the moving sanding barrel, as it will continue to move for a short time after the machine is switched off.

10.Wear safety goggles, a dust mask and earmuffs.

11.Use coarse grade to remove rough finishes, Medium grade to smooth the work and Fine grade to finish it off. It is best to make a trial run on a scrap piece of material to determine the optimum grades of belt for a particular job. In order to take full advantage of sanding function, always purchase good quality sanding barrels.

Selecting the right grade of sanding barrel

Different grades of sanding barrels can be purchased from your local hardware store. Typical grades are Coarse (40 grit), Medium (80 and 100 grit) and Fine (120 Grit).

Note: After sanding with a barrel sander, an orbital sander should be used to give a better surface

3BVSIPCF specifications

Global Machinery Company 3BVSIPCF has established itself as a leading innovator in the field of industrial machinery. With a focus on advanced engineering and cutting-edge technology, the company has developed a diverse range of products designed to meet the needs of various industries, including construction, manufacturing, and logistics.

One of the standout features of 3BVSIPCF is its commitment to sustainability. The company has made significant strides in creating environmentally friendly machinery that reduces waste and promotes energy efficiency. Incorporating eco-friendly materials and designs, their machinery not only meets stringent environmental standards but also helps businesses reduce their carbon footprint.

In terms of technology, 3BVSIPCF utilizes state-of-the-art automation and robotics in its machinery. This integration allows for higher precision, increased productivity, and reduced labor costs. The company’s use of Artificial Intelligence (AI) and Machine Learning (ML) enables smarter operations, optimizing processes through predictive maintenance and real-time data analysis. This technological edge positions 3BVSIPCF as a pioneer in smart manufacturing.

Another key characteristic of Global Machinery Company is its adaptability. With an extensive research and development program, 3BVSIPCF continuously evolves its product line to cater to changing market demands. The company engages closely with clients to understand their specific requirements, allowing them to deliver customized machinery solutions that enhance efficiency and performance in diverse environments.

User-friendly interfaces are also a hallmark of 3BVSIPCF’s machinery. The outstanding design emphasizes ease of operation, enabling workers with varying skill levels to interact with complex systems effectively. Coupled with comprehensive training programs, this ensures that clients can maximize the benefits of their investment in machinery.

Finally, Global Machinery Company 3BVSIPCF stands out for its global reach and strong customer support network. With dedicated service teams across various regions, clients can expect prompt and knowledgeable assistance, ensuring the longevity and efficiency of their machinery operations.

In summary, Global Machinery Company 3BVSIPCF combines sustainability, advanced technology, adaptability, user-friendliness, and robust support to deliver exceptional industrial machinery to markets worldwide. This holistic approach solidifies its reputation as a trusted leader in the field, helping businesses thrive in an increasingly competitive landscape.