CARTON CONTENTS
Your new 15" Planer is shipped complete in one box (Fig. 2). IMPORTANT: Care must be taken when removing the machine from the container. The machine is very heavy and a minimum of four people will be required to lift the machine (see the section “LIFTING THE MACHINE”). Figure 3 Illustrates the loose items supplied with your machine.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After
cleaning, cover the unpainted surfaces with a good qualityFig. 2 household floor paste wax.
1
|
|
|
| 3 |
| ||
|
| 2 |
|
|
| 5 | |
|
|
|
| 4 |
| ||
12 | 11 |
|
| 13 |
|
| |
|
|
|
|
| |||
|
| 14 |
|
|
|
| |
|
|
|
|
|
| ||
|
| 15 |
|
|
|
|
|
| 17 | 16 |
| 10 | 6 | ||
|
|
| |||||
|
|
|
|
| |||
18 |
| 7 | |
8 | |||
| |||
| 9 | ||
|
|
| |
|
| Fig. 3 | |
1- Top cover
2- M6 x 16mm hex flange screw (4) - for fastening top cover to machine
3- Cord clamp
4- Knife setting gage
5- Raising and lowering handwheel
6- Key for raising and lowering handwheel
7- Decal for raising and lowering handwheel
8- M10 flat washer for raising and lowering handwheel
9- M10 hex nut for raising and lowering handwheel
10 - Handle for raising and lowering handwheel
11 - Open end wrench (10 and 12mm)
12 - Open end wrench (14 and 17mm)
13 - Hex wrench (6mm)
14 - Hex wrench (5mm)
15 - Hex wrench (3mm)
16 - Hex wrench (2.5mm)
*17 - M6 x 16mm Screw (2) - for fastening switch bracket to machine
*18 - M6 flat washer (2) - for fastening switch bracket to machine
*Supplied with three phase machines only
8