Global Machinery Company 420W instruction manual Maintenance, Cleaning, Power cord maintenance

Page 11

Maintenance

WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance procedures.

Regularly check that all the fixing screws are tight. They may vibrate loose over time.

Cleaning

1.Keep the tool’s air vents unclogged and clean at all times.

2.Remove dust and dirt regularly. Cleaning is best done with a rag.

3.Re-lubricate all moving parts at regular intervals.

4.Never use caustic agents to clean plastic parts.

CAUTION. Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.

Power cord maintenance

If the supply cord needs replacing, the task must be carried out by the manufacturer, the manufacturer’s agent, or an authorised service centre in order to avoid a safety hazard

11

Image 11
Contents 420W Magnesium Palm Planer Contents Introduction Description of symbolsSpecifications Dear CustomerGeneral safety rules Additional safety rules for electric planers Unpacking AccessoriesClamping screw Know your productSetting up Planing Adjusting the depth of cutSwitching on and off Chamfering and rebating Drive belt replacementShavings extraction Power cord maintenance MaintenanceCleaning Save this Manual for future reference GMC Head Office