Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure
		GB
that the problem cannot be not solved easily using the following list.

Problem:	Possible causes / Solutions:

The machine does not switch on.

The wash cycle does not start.

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power to the socket, or the fuse has blown in the mains plug.

•The door is not closed properly.

•The ON/OFF button has not been pressed.

•The START/PAUSE button has not been pressed.

•The water tap has not been turned on to allow water to flow into the machine.

•A delayed start has been set.

The machine does not fill with wa- ter or the indicator light for the first wash cycle stage flashes rapidly.

•The water inlet hose is kinked.

•The water inlet hose is not connected to the water supply.

•The water pressure is too low.

•The water tap has not been turned on to allow water to flow into the machine.

•There is no water supply to the house.

•The inlet valve filter is blocked.

•The START/PAUSE button has not been pressed.

The machine continuously fills with water and continually drains away or Water left in the drum

or Stuck on wash.

•The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

•The end of the drain hose has been pushed too far down the standpipe, the ‘U’ bracket should be fitted 100 mm from the end of the drain hose.

The machine does not drain or spin.

The machine does not heat or poor wash results.

The programme takes too long.

•The Pump filter is blocked.

•The drain hose is kinked (see “Installation”).

•New Installation - The blanking cap or spigot has not been removed if connected under a sink.

•The drain hose or sink trap is blocked.

•The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.

•The ‘Spin Speed’ selector knob is in the ““position.

•The ‘Temperature’ selector knob is in the “” position.

•Programme times will vary due to water pressure, the incoming water tempera- ture and if the wash load goes out of balance. This will increase the programme times accordingly (see ‘ The machine wont spin properly’ below).

The machine vibrates a lot during the spin cycle.

•The feet have not been adjusted, enabling the machine to rock.

•New Installation - Either the Transit Bolts including the plastic spacers, or the

Polystyrene Packaging have not been removed when installing the machine.

•The machine is trapped between cabinets and/or walls.

•The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

IWC 8123 specifications

The Indesit IWC 8123 is a high-quality, front-loading washing machine designed to offer efficiency and convenience for modern households. With its sleek design and user-friendly features, it has become a popular choice among consumers looking for a reliable appliance that can handle a range of laundry tasks.

One of the standout features of the Indesit IWC 8123 is its impressive capacity. With an 8 kg wash load, this model can accommodate larger laundry loads, making it ideal for busy families or those who regularly wash bulky items like towels and bedding. This capacity is complemented by a variety of wash programs, allowing users to select the perfect cycle for different fabric types and soil levels. From delicate silks to robust cottons, the IWC 8123 ensures optimal care for all fabrics.

Equipped with innovative technologies, the Indesit IWC 8123 incorporates a powerful motor that delivers efficient washing performance while keeping noise levels to a minimum. This is particularly beneficial for households where the washing machine is placed near living areas, as it ensures a quieter operation.

The washing machine also features the Energy Saver function, which intelligently adjusts the wash parameters to reduce energy consumption without compromising on performance. This is an essential feature for environmentally conscious consumers looking to lower their energy bills while still achieving excellent washing results.

Moreover, the IWC 8123's built-in sensors detect load size and adjust the water and energy use accordingly, ensuring users don't waste resources on smaller loads. This intelligent design contributes to its overall efficiency and sustainability.

Another noteworthy characteristic of the Indesit IWC 8123 is its user-friendly interface. The digital display and intuitive control panel make it easy for users to select their desired settings, monitor the cycle progress, and set delay timers for added convenience.

In summary, the Indesit IWC 8123 is an exemplary washing machine that blends capacity, efficient performance, and advanced technology. Its range of features ensures it meets the diverse needs of modern households while providing reliable service and energy savings. This makes it a smart addition to any home looking to elevate their laundry experience.

Troubleshooting

Problem:

Possible causes / Solutions:

IWC 8123 specifications