Indesit IWC 8123 manual Installation, Unpacking and levelling, See figure

Page 2

Installation

GB

! This instruction manual should be kept in a safe place for

future reference. If the washing machine is sold, transferred

 

 

or moved, make sure that the instruction manual remains

 

with the machine so that the new owner is able to familiari-

 

se himself/herself with its operation and features.

 

! Read these instructions carefully: they contain vital infor-

 

mation relating to the safe installation and operation of the

 

appliance.

 

Unpacking and levelling

 

Unpacking

 

1. Remove the washing machine from its packaging.

 

2. Make sure that the washing machine has not been

 

damaged during the transportation process. If it has been

 

damaged, contact the retailer and do not proceed any

 

further with the installation process.

 

3. Remove the 4 protective

 

screws (used during tran-

 

sportation) and the rubber

 

washer with the correspon-

 

ding spacer, located on the

 

rear part of the appliance

 

(see figure).

4.Close off the holes using the plastic plugs provided.

5.Keep all the parts in a safe place: you will need them again if the washing machine needs to be moved to ano- ther location.

!Packaging materials should not be used as toys for children.

Levelling

1.Install the washing machine on a flat sturdy floor, without resting it up against walls, furniture cabinets or anything else.

2. If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjusta- ble front feet (see figure); the angle of inclination, measured in relation to the worktop, must not exceed 2°.

Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

1. Connect the supply pipe by screwing it to a cold water tap using a ¾ gas threaded connection (see figure).

Before performing the con- nection, allow the water to run freely until it is perfectly clear.

2. Connect the inlet hose to the washing machine by screwing it onto the corre- sponding water inlet of the appliance, which is situa- ted on the top right-hand side of the rear part of the appliance (see figure).

3. Make sure that the hose is not folded over or bent.

!The water pressure at the tap must fall within the values indicated in the Technical details table (see next page).

!If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

!Never use second-hand hoses.

!Use the ones supplied with the machine.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Instructions for use Washing MachineUnpacking and levelling InstallationConnecting the electricity and water supplies See figureDisposing of the plug Replacing the fuseRemoving the plug First wash cycle Disposing of the applianceTechnical data Control panel Detergent dispenser drawerSet the spin speed see Personalisation Indicator lightsStarting a wash cycle Wash cycles Table of wash cyclesTable of wash cycles PersonalisationFunctions Set for each wash cycleLoad balancing system Detergents and laundryDetergent dispenser drawer Preparing the laundryDisposal Precautions and tipsGeneral safety Care and maintenance Troubleshooting Problem Possible causes / SolutionsMachine is noisy Assistance Essential Contact Information After Sales Service195082968.03 Recycling & Disposal Information
Related manuals
Manual 16 pages 46.84 Kb

IWC 8123 specifications

The Indesit IWC 8123 is a high-quality, front-loading washing machine designed to offer efficiency and convenience for modern households. With its sleek design and user-friendly features, it has become a popular choice among consumers looking for a reliable appliance that can handle a range of laundry tasks.

One of the standout features of the Indesit IWC 8123 is its impressive capacity. With an 8 kg wash load, this model can accommodate larger laundry loads, making it ideal for busy families or those who regularly wash bulky items like towels and bedding. This capacity is complemented by a variety of wash programs, allowing users to select the perfect cycle for different fabric types and soil levels. From delicate silks to robust cottons, the IWC 8123 ensures optimal care for all fabrics.

Equipped with innovative technologies, the Indesit IWC 8123 incorporates a powerful motor that delivers efficient washing performance while keeping noise levels to a minimum. This is particularly beneficial for households where the washing machine is placed near living areas, as it ensures a quieter operation.

The washing machine also features the Energy Saver function, which intelligently adjusts the wash parameters to reduce energy consumption without compromising on performance. This is an essential feature for environmentally conscious consumers looking to lower their energy bills while still achieving excellent washing results.

Moreover, the IWC 8123's built-in sensors detect load size and adjust the water and energy use accordingly, ensuring users don't waste resources on smaller loads. This intelligent design contributes to its overall efficiency and sustainability.

Another noteworthy characteristic of the Indesit IWC 8123 is its user-friendly interface. The digital display and intuitive control panel make it easy for users to select their desired settings, monitor the cycle progress, and set delay timers for added convenience.

In summary, the Indesit IWC 8123 is an exemplary washing machine that blends capacity, efficient performance, and advanced technology. Its range of features ensures it meets the diverse needs of modern households while providing reliable service and energy savings. This makes it a smart addition to any home looking to elevate their laundry experience.
Top Page Image Contents