Personal Safety

change the plug in any way. Double insula-

tion eliminates the need for the three wire grounded power cord and grounded power supply system.

5.Avoid body contact with grounded sur- faces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

8.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

9.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

10.Dress properly. Do not wear loose cloth- ing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

11.Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

12.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

14.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection.

Tool Use and Care

15.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

16.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17.Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool ser- viced before using. Many accidents are caused by poorly maintained tools.

22.Use only accessories that are recom- mended by the manufacturer for your

1902 specifications

The Makita 1902 is a highly versatile and reliable power tool that has gained popularity among professionals and DIY enthusiasts alike. This model stands out due to its robust design and a range of innovative features that enhance its performance in various applications.

One of the main features of the Makita 1902 is its powerful 10.0 AMP motor, which delivers a no-load speed of up to 5,500 RPM. This high-speed capability allows the tool to handle a wide array of materials, from wood to metal, with precision and ease. The inclusion of a variable speed control further increases its versatility, enabling users to adjust the speed according to the specific task at hand.

Another noteworthy characteristic of the Makita 1902 is its lightweight design, weighing just around 6.2 pounds. This ergonomic construction not only makes the tool easy to handle but also reduces user fatigue during extended periods of use. The comfort grip handle enhances control and stability, ensuring that users can work efficiently without compromising safety.

The Makita 1902 is equipped with a built-in dust blower that helps keep the work surface clean and free of debris. This feature is particularly beneficial when working on projects that generate a lot of dust, such as woodworking or drywall cutting. By maintaining a clear line of sight, the dust blower allows for more accurate and precise cuts.

In addition to its practical features, the Makita 1902 employs advanced technologies that improve its overall performance. The tool incorporates a unique motor protection system to prevent overheating and extend its lifespan. This is crucial for high-demand tasks, as it ensures reliable operation throughout the duration of heavy use.

Furthermore, the Makita 1902 features a durable construction with high-quality materials, ensuring it can withstand demanding job site conditions. The tool's robust housing is designed to resist wear and tear, significantly enhancing its longevity.

In conclusion, the Makita 1902 is a standout power tool that combines power, speed, and user-friendly features, making it an ideal choice for a variety of applications. Whether for professional use or home improvement projects, the Makita 1902 delivers impressive results and reliability, making it a valuable addition to any tool collection.