Note: If too much current is drawn from the MIG Welder, the Thermal Overload protector will activate, the red Overheating indicator will light, and the Arc Welder will turn off until it cools down. If this happens, turn the Power Switch to the OFF (0) position and wait about 3 ~ 5 minutes.
10.When the weld is complete, lift the Torch Handle electrode wire clearly away from any grounded object, lift your Face Shield, and turn the Power Switch to the OFF (0) position.
11.Unplug the Power Cord from the electrical outlet.
Maintenance
Warning: Before performing any maintenance on the MIG Welder, unplug the Power Cord from the electrical outlet.
1.Periodically using compressed air, open the top and side panels and blow out all dust from the interior.
2.Store the unit in a clean and dry location.
3.Periodically clean out the Torch Head.
Replacing the Wire Reel
When the wire on the Feed Reel is used up, you will need to replace it as described on page 6, step 6 through step 13.
Parts List
Part | Description | Part | Description | Part | Description | |
|
|
|
|
|
| |
1 | Case | 17 | Wire Spool | 32 | Panel | |
|
|
|
|
|
| |
2 | Folding Cover | 18 | Brake | 33 | Wire Tension Control/ | |
3 | Vent Cover | 19 | Fan | Lock | ||
| ||||||
|
|
|
|
|
| |
4 | Coil Cover | 20 | Front Panel | 34 | Feed Control Wheel | |
|
|
|
|
|
| |
5 | Transformer Cover | 21 | LED Display | 35 | Current Collector | |
|
|
|
|
|
| |
6 | Current Adjusting Knob | 22 | Power Switch | 36 | Wheels | |
|
|
|
|
|
| |
7 | Main Transformer | 23 | Wire Speed Control | 37 | Right handle | |
|
|
|
|
|
| |
8 | Circuit Board | 24 | Wire Speed Knob | 38 | Left handle | |
|
|
|
|
|
| |
9 | Diode Board | 25 | Handle Bracket | 39 | Trigger | |
|
|
|
|
|
| |
10 | Starter | 26 | Handle | 40 | Nozzle Tube | |
|
|
|
|
|
| |
11 | Throttle | 27 | Input Line Cord | 41 | Tip | |
|
|
|
|
|
| |
12 | Ground Clamp | 28 | Cable Strain Relief | 42 | Nozzle | |
|
|
|
|
|
| |
13 | Ground Cable | 29 | Torch & Hose Assy | 43 | Tip | |
14 | Ground Terminal | (Contains parts | 44 | Cord | ||
| ||||||
|
|
|
|
|
| |
15 | Retainer | 30 | Electric Motor | 45 | 1 Lb. Spool of .032" | |
16 | Back Panel | 31 | Panel | Welding Wire | ||
| ||||||
|
|
|
|
|
|
REV 06/05
SKU 03664 | For technical questions, please call | Page 9 |