For technical questions and replacement parts, please call
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. Northern Tool + Equipment strongly recommends this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Northern Tool + Equipment to determine if it can or should be performed on the product.
INTENDED USE
The Rotary Hammer Drill is specifically designed for fast impact drilling of anchor holes and through holes for concrete and masonry.
TECHNICAL SPECIFICATIONS
Description | Specifications |
Motor: | 120V, 60Hz, 7.6 Amps |
No load speedd: | 800 RPM |
Impacts: | 3100 BPM |
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean and well lit. Cluttered and dark work areas can cause accidents.
1