Jet Tools PH-24T guide

1.Read and understand the entire owner’s manual before attempting assembly or operation.

2.Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury.

3.Replace the warning labels if they become obscured or removed.

4.This planishing hammer is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a planishing hammer, do not use until proper training and knowledge have been obtained.

5.Do not use this planishing hammer for other than its intended use. If used for other purposes, Walter Meier (Manufacturing) Inc., disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

6.Always wear approved safety glasses/face shields while using this planishing hammer. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

7.Before operating this planishing hammer, remove tie, rings, watches and other jewelry, and roll sleeves up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor strips are recommended.

8.Wear ear protectors (plugs or muffs) during extended periods of operation.

9.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint.

•Crystalline silica from bricks, cement and other masonry products.

•Arsenic and chromium from chemically treated lumber.

Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.

10.Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.

11.Make certain the machine is properly grounded.

12.Make all machine adjustments or maintenance with the machine unplugged from the power source.

13.Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning it on. .

14.Check damaged parts. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

15.Provide for adequate space surrounding work area and non-glare, overhead lighting.

16.Keep the floor around the machine clean and free of scrap material, oil and grease.

17.Don't use in dangerous environment. Don't use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted.

18.Keep visitors a safe distance from the work area. Keep children away.

19.Make your workshop child proof with padlocks, master switches or by removing starter keys.

PH-24T specifications

The Jet Tools PH-24T is a high-performance planer that stands out in the woodworking industry for its precision and efficiency. This powerful tool is designed for professionals and hobbyists alike, offering a range of features that make it a favorite among woodworkers seeking smooth and accurate finishes on their projects.

One of the main features of the Jet Tools PH-24T is its robust 15-amp motor, which provides consistent power and durability. This motor is capable of driving the cutter head at an impressive speed of 8,000 RPM, allowing the planer to remove up to 1/8 inch of material in a single pass. This capability not only speeds up the milling process but also ensures a clean and smooth surface, reducing the need for additional sanding.

The PH-24T is equipped with a precision-ground cast iron table that is large enough to support larger workpieces, providing stability and reducing the chance of snipe during operation. This table is adjustable, allowing users to fine-tune their setup for precise cuts. The tool also features extra-long infeed and outfeed tables, which help in guiding the wood smoothly through the planer, further enhancing the quality of the finish.

Another standout aspect of the Jet Tools PH-24T is its quick-change cutter head, which allows for easy blade replacement. The blades are high-speed steel and razor-sharp, offering users a long-lasting cutting edge. The design of the cutter head facilitates efficient chip removal, minimizing clogging and ensuring a clean cut.

The integrated dust collection port can connect to a vacuum system, effectively managing chips and debris during operation. This feature not only keeps the workspace clean but also enhances visibility and safety while working.

Safety features are also prioritized in the Jet Tools PH-24T. It comes with safety guards and emergency stop switches, giving users peace of mind while operating the planer.

In summary, the Jet Tools PH-24T is an exceptional planer that blends power, precision, and safety features. Its robust motor, adjustable components, and user-friendly design make it an essential tool for anyone serious about woodworking. Whether you're flattening rough lumber or finishing pieces, the PH-24T delivers outstanding results with every use, making it a valuable addition to any workshop.