Makita HR3851 Chipping/Scaling/Demolition, Core bit optional accessory, When using the center bit

Page 10

003205

003209

1

2

1.Core bit

2.Adapter

003210

1

1. Center bit

003211

Chipping/Scaling/Demolition

Set the change lever to the symbol.

Hold the tool firmly with both hands. Turn the tool on and apply slight pressure on the tool so that the tool will not bounce around, uncontrolled. Pressing very hard on the tool will not increase the efficiency.

Core bit (optional accessory)

When using the center bit

Screw the core bit on the adapter. Install the adapter with the core bit in the tool in the same manner as a drill bit.

Install the center bit.

Rest the core bit on the concrete and turn the tool on. Once the core bit has cut a shallow groove into the concrete, remove the center bit. Then resume drilling.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rotary Hammer Electrical Safety Work AreaPersonal Safety Tool Use and CareService Specific Safety Rules Page Functional Description Switch actionSelecting the action mode Rotation with hammeringInstalling or removing the bit AssemblySide grip auxiliary handle Depth gauge Blow-out bulb optional accessoryOperation Hammer drilling operationWhen using the center bit Core bit optional accessoryChipping/Scaling/Demolition Maintenance When not using the center bitReplacing carbon brushes LubricationAccessories Memo Memo Memo Makita U.S.A., Inc Mail this Portion Factory Service Centers Makita Limited ONE Year Warranty
Top Page Image Contents