Panasonic SC-PM29 Specifications, When moving the unit, Maintenance, Product Service

Specifications

g AMPLIFIER SECTION RMS Power output

10% Total harmonic distortion

1 kHz, both channels driven

(Low channel)	35 W per channel (6 Ω)
8 kHz, both channels driven
(High channel)	35 W per channel (6 Ω)
Total Bi-Amp power	70 W per channel
Input sensitivity
AUX	250 mV
Input Impedance
AUX	11.8 kΩ

g FM TUNER SECTION

Frequency range	87.9 - 107.9 MHz
Sensitivity	1.8 µV (IHF)
S/N 26 dB	1.5 µV
Antenna terminal(s)	75 Ω (unbalanced)

g AM TUNER SECTION

Frequency range	530 - 1710 kHz
Sensitivity
S/N 26 dB (at 999 Hz)	560 µV\m

g CASSETTE DECK SECTION

Track system		4 track, 2 channel
Heads
Record/playback		Solid permalloy head
Erasure	Double gap ferrite head
Motor		DC servo motor
Recording system		AC bias 100 kHz
Erasing system		AC erase 100 kHz
Tape speed		4.8 cm/s
Overall frequency response
(+3 dB, -6 dB at DECK OUT)
NORMAL (TYPE I)		35 Hz - 14 kHz
S/N		50 dB (A weighted)
Wow and flutter		0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
g CD SECTION		C-60 cassette tape
Disc played
CD/MP3/WMA		8cm/12cm, CD-R/RW
Sampling frequency		44.1 kHz
Decoding		16 bit linear
Pickup

Beam source/wavelength

Semiconductor laser/780 nm

Number of channels		Stereo
Frequency response
	20 Hz - 20 kHz (+1, -2 dB)
Wow and flutter	Below measurable limit
Digital filter		8 fs
D/A converter		MASH (1 bit DAC)
MP3
Bit rate		32 kbps - 320 kbps
Sampling frequency
	32 kHz, 44.1 kHz, 48 kHz
WMA
Sampling frequency
	32kHz, 44.1kHz, 48kHz

g SPEAKER SECTION

Type	2 way 2 speaker system
Speaker(s)
Woofer		10 cm cone type
Tweeter		6 cm cone type
Impedance
HIGH		6 Ω
LOW		6 Ω
Input power
HIGH		70 W (Music)
LOW		70 W (Music)
Output sound pressure level
		80 dB/W (1.0 m)
Cross over frequency		3.5 kHz
Frequency range
	55 Hz - 31 kHz (-16 dB)
	75 Hz - 26 kHz (-10 dB)
Dimensions (W x H x D)
		155 x 250 x 258 mm
Mass		2.3 kg

g GENERAL

Power supply	AC 120 V, 60 Hz)
Power consumption	130 W
Dimensions (W x H x D)
	179 x 247 x 378 mm
Mass	5.4 kg
Power consumption in standby
mode: Approx. 0.6 W

Note

1.Specifications are subject to change without notice.

Mass and dimensions are approximate.

2.Total harmonic distortion is measured by the digital spectrum analyzer.

3.The labels “HIGH (HF)” and “LOW (LF)” on the rear of the speakers refer to High frequency and Low frequency.

When moving the unit

1.Remove all discs.

2.Press [8] to turn the unit off.

3.Disconnect the AC mains lead.

Maintenance

For a cleaner crisper sound

Clean the heads regularly to assure good quality playback

and recording.

Use a cleaning tape (not included). If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

•	Never use alcohol, paint thinner or
	benzine to clean this unit.
•	Before using chemically treated
	cloth, read the instructions that
	came with the cloth carefully.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

RQT7372

26

Product Service

1.Damage requiring service - The unit should be serviced by qualified service personnel if:

(a)The AC power supply cord or the plug has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change in performance; or

(e)The unit has been dropped or the cabinet damaged.

2.Servicing - Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3.Replacement parts - When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4.Safety check - After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system.

Product information

For product information or assistance with product operation:

In the U.S.A., refer to “Customer Services Directory” on page 27. For assistance in the continental U.S.A in obtaining repairs please ship the product to:

Panasonic Services Company - Customer Servicenter Suite B 4900 George McVay Drive, MacAllen, TX 78503

In Puerto Rico contact the Panasonic Sales Company. Tel. (787) 750-4300 Fax. (787) 768-2910

When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/ PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Also, the purchaser will be responsible for shipping the unit to the above address. In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit website (www.panasonic.ca), or an authorized Servicentre closest to you.