Miller Electric 700 manual Performance Data, TIG Upgrade Chart, Which Machine is Right for You?

Performance Data

	DUTY CYCLE
Maxstar 350		Maxstar 700
%	3-PHASE	%	3-PHASE
	AMPERAGE		AMPERAGE

ANNUAL POWER COST OF OPERATION

Annual power costs based on one 8 hour shift (40 hrs/wk).

Power cost of $0.08/kWh.

$1,600
$1,400	25%	ARC ON= 2 HOURS/SHIFT	T
	50%	ARC ON= 4 HOURS/SHIFT

0 – 30%	350 A
60%	300 A
100%	250 A

1-PHASE

%AMPERAGE

0 – 10%	350 A
30%	250 A
60%	225 A
100%	180 A

0 – 30%	700 A
60%	600 A
100%	500 A

1-PHASE

%AMPERAGE

0 – 10%	700 A
30%	500 A
60%	450 A
100%	360 A

$1,200			75% ARC ON= 6 HOURS/SHIFT																	D
	D= Dynasty			T= Traditional														T
$1,000																	D
														D	T
$800
											D	T
$600
							D		T
$400
$200		D T		D	T
$-
	50			100		150				200			250			300			350
								AMPERAGE

TIG Upgrade Chart

Which Machine is Right for You?

Why Upgrade?	Syncrowave 350		Dynasty 350			Dynasty 350 Benefits
Maximum Thickness Capacity	1/2 in Aluminum	UPGRADE	5/8 in Aluminum			Increases aluminum thickness.
High Frequency Arc Starting	Continuous HF	UPGRADE	Start Only			Start Only limits HF interference issues.
Frequency Control	Fixed at 60 Hz	UPGRADE	Variable 20–400 Hz			Higher frequencies provide better arc control
AC Output Control						and faster travel speeds.
AC Waveforms	Soft Squarewave	UPGRADE	Advanced Squarewave		Soft Squarewave	Advanced Squarewave=Travel faster
						Soft Squarewave= Maximum puddle control
				Sine Wave	Triangular Wave	Sine Wave= Traditional characteristics
						Triangular Wave= Reduced heat input
Weld Aluminum		UPGRADE				Waveshaping controls maintain the point. The
with Pointed Tungsten						benefits are: reduced heat input into your part,
						smaller weld beads, better starting and more
						control of the arc.
Portability	496 lb	UPGRADE	135 lb			Easier to move because of size and weight.
	Manual Links		Auto-Line™			Auto-Line™ allows the unit to operate on any
	208/230/460 V		208–575 V			voltage. Single- or three-phase. Even generators!
	Single-Phase		Single-Phase or Three-Phase
Power Draw at 300 Amps	110 A at 230 V	UPGRADE	32 A at 230 V			Power requirement to operate is much less.
	Single-Phase		Three-Phase			Smaller electrical service needed, smaller
						breaker/fuses and power cord.
Precise Controls	Some Digital Controls	UPGRADE	All Digital Controls			Accuracy and repeatability with all digital controls.

3