Miller Electric 350MPa manual Control Panel, Built-In Pulsed MIG Programs

Control Panel

The Invision™ 350 MPa and S-74 MPa combine for a synergic system that simplifies and improves MIG and Pulsed MIG welding applications for industrial manufacturing.

1

6

MPa

MPa: M (MIG), P (Pulse), a (Advanced

OUTPUT ON

2

3

4

5

1.Output ON Indicator Light

2.Left Display

3.Voltage Indicator

4.Arc Length Indicator

5.Wire Feeder Receptacle

6.Adjustment Control

7.Right Display

Setup		Arc Control). Advanced arc control
7		enables an improved pulse welding arc.
8		The operator has more control over puddle
9		™
		and bead characteristics using SharpArc .
		In addition, the unit provides a more robust
Arc Control
Process		and stable arc at very low arc length, reducing
Wire/Gas		heat input, and providing the ability to weld
		on a wider range of material thickness.
	10	Synergic pulsing is available only with the
SETUP		S-74 MPa dedicated wire feeder.
		What are some benefits of
		Synergic-Pulsed MIG?
8. Setup Indicator		1. Easier to set up
		2. No more changing wire speed, and
9. Amperage Indicator
		then having to go back to reset the
10. Setup Indicator Lights
		welding output.
• Arc Control Indicator
• Process Indicator		Additional Features
• Wire/Gas Type Indicator
• Setup Button
		SharpArc™
		Changes welding arc characteristics in
		Pulsed MIG (GMAW-P) welding mode.

Built-In Pulsed MIG Programs

The Invision 350 MPa has built-in dynamic Pulsed MIG capabilities. See the table below for the wide range of Pulsed MIG (GMAW-P) welding applications the Invision 350 MPa can handle.

	Wire Types			Gas Types
Steel		.035	STL	ARGN CO2 (Argon/Carbon Dioxide)
		.045	STL	ARGN OXY (Argon/Oxygen)
Metal Core		.035	MCOR	ARGN CO2 (Argon/Carbon Dioxide)
		.045 MCOR
		.052 MCOR
Stainless Steel		.035	SSTL	TRI MIX (Tri-gas mixture)
		.045	SSTL	ARGN OXY (Argon/Oxygen)
				ARGN CO2 (Argon/Carbon Dioxide)
Aluminum		.035	AL4X (4000 Series)	ARGN (Argon)
		3/64 AL4X (4000 Series)
		.035	AL4X (5000 Series)
		3/64 AL4X (5000 Series)
Nickel		.035	NI	ARGN HE (Argon/Helium)
		.045	NI
Silicon Bronze		.035	SIBR	ARGN (Argon)
Copper Nickel		.045	CUNI	HE ARGN (Helium/Argon)

	(0 setting)		(50 setting)
Low Setting		High Setting

Note: Setting has a subtle effect on arc that is exaggerated in graphic for visual emphasis.

If a gas is used other than what is listed on the Pulsed MIG welding program chart (below left), the SharpArc™ can be adjusted to help customize your arc to the gas being used.

Lower SharpArc™ settings widen the arc cone, increase puddle fluidity and flattens the weld bead.

Auto Remote Sense™

Enables unit to automatically use remote control if connected to remote control receptacle.

Dinse International-style weld disconnects Provide high-quality weld cable connections. Dinse and Tweco connectors are available. When Dinse connectors are specified, two connectors are supplied with the unit.

Optional 115 VAC auxiliary power Provides 10 amps of circuit-breaker- protected power for water circulators, etc.

3