Genuine Miller Accessories, Running Gear

Genuine Miller Accessories

Industrial MIG 4/0 Kit with Dinse Connector #300 405

This useful pulse-ready MIG kit can be purchased separately. Includes Smith® flowmeter/regulator with 10 ft (3 m) gas hose, 10 ft (3 m) 4/0 feeder weld cable with Dinse connector on one end and a lug on the other, 15 ft (4.6 m) work cable with Dinse connector on one end and 600-amp C-clamp on the other.

Process Selector Control #042 872 Designed for use with dual wire feeders, applications where electrical isolation and/or polarity reversing of weld current is required, and for welding process changes. Includes 115 VAC/2 amp receptacle, two 14-pin receptacles and a 10 ft (3 m) 14-pin cord.

Running Gear

MIGRunner™ Cart #195 445 Small footprint and easily maneuverable, with cylinder rack low enough that you do not have to lift bottles.

XMT Cylinder Cart #042 537 Carries two 160 lb (72.6 kg) gas cylinders, or one gas cylinder and one coolant system for TIG (GTAW) welding. Feeder mounts to tray above power source.

Universal Carrying Cart and Cylinder Rack #042 934 Holds power source, and gas cylinder up to 56 in (142.2 cm) high measuring 6 to 9 in (15.2 to 22.8 cm) in diameter.

Wire Feeders/Guns

70 Series

S-74 MPa #300 411*

S-74S #195 057

S-74D #195 058 S-74DX #195 059

Wire feeder features Posifeed™ wire drive assembly and handles a variety of wires up to 1/8 in. Comes with FREE Bernard® Q™-Gun. See Lit. Index No. M/3.0.

*Designed exclusively for Invision 350 MPa for Synergic Pulsed MIG benefits.

XR™-Control #181 538 Push-pull wire feed system offers unparalleled performance for aluminum MIG

welding. See Lit. Index No. M/1.7.

XR™-Aluma-Pro™Gun*

Protective Cover

#195 478

Mildew and water resistant, odor-free cover protects your machine’s finish. For 300/350 A inverters: Invision, XMT, Maxstar and Dynasty.

#300 000 15 ft (4.6 m) air-cooled #300 001 25 ft (7.6 m) air-cooled #300 264 35 ft (10.6 m) air-cooled

#300 003 15 ft (4.6 m) water-cooled #300 004 25 ft (7.6 m) water-cooled #300 265 35 ft (10.6 m) water-cooled This easy-to-use and easy-to-maintain gooseneck-style MIG gun is designed for push-pull wire feed systems (with required XR-Control). Available in air- or water- cooled versions. Trigger hold reduces operator fatigue (feature available when paired with XR-Control). Gun design allows for better access into tight spots. See Lit. Index No. M/1.7.

*XR-Control is required to operate this gun with the Invision 350 MPa System.