Switching on and off fig. E, Maintenance

◆Set the control knob (3) to the desired setting. At setting 1 the tool will operate at low speed, 8,000 min-1. At setting 6 the tool will operate at the maximum speed, 27,000 min-1.

The table below suggests settings for different applications.

Application	Setting
Drilling holes	4-5
Cutting metal	5-6
Engraving metal	4-5
Removing rust	1-2
Sharpening	3-5
Polishing	1-2
Sanding wood	5-6
Removing paint	3-5

Switching on and off (fig. E)

◆To switch the tool on, slide the on/off switch (1) forward (position I).

◆To switch the tool off, slide the on/off switch to the rear (position 0).

Hints for optimum use

◆Always hold the tool securely as shown in fig. F. For precision work, hold the tool near the front.

◆Do not exert too much pressure on the tool.

◆Consult your retailer for more information on available accessories.

MAINTENANCE

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Before performing any maintenance, switch off and unplug the tool.

◆Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.

◆Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

E N G L I S H

PROTECTING THE ENVIRONMENT

Should you find one day that your tool needs replacement, or if it is of no further use to you, think of the protection of the environment. Black & Decker repair agents will accept old Black & Decker tools and ensure that they are disposed of in an environmentally safe way.

Technical data

		RT650
Voltage	VAC	230
Power input	W	90
No-load speed	min-1	8,000 - 27,000
Weight	kg	$

GUARANTEE (UK, SOUTH AFRICA, AUSTRALIA AND NEW ZEALAND ONLY)

Should your Black & Decker product become defective due to faulty materials or workmanship, within 24 months from the date of purchase, we guarantee to either replace all defective parts or -at our discretion- to replace the unit free of charge, provided that:

◆The product is returned to us or one of our authorised repair agents with proof of purchase.

◆The product has not been used for trade, professional or hire purposes.

◆The product has not been subjected to misuse or neglect.

◆The product has not sustained any damage through foreign objects, substances or accidents.

◆Repairs have not been attempted by anyone

other than our service staff or authorised repair agents.

This guarantee is offered as an extra benefit and does not affect your statutory rights.

AFTER SALES SERVICE

(UK, SOUTH AFRICA, AUSTRALIA AND NEW ZEALAND ONLY)

Black & Decker offers a nationwide network of authorised repair agents. The use of other than genuine Black & Decker parts and accessories may reduce the performance of the tool and cause personal injury and material damage.

RT650_UK.PM5

13-11-2000, 11:03