SAFETY
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
SETUP
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.Monthly, open the Grease Port, clean out old grease, and replace with new grease.
Grease Port Cover
3.AFTER USE, wipe external surfaces of the tool with clean cloth.
4.Lubricate the bit shank with grease each time before installing to maintain the life of the internal mechanism.
5.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
OPERATION
MAINTENANCE
Figure D: Grease Port
NOTICE: Warranty void if grease maintenance (internal and bit shank) is not followed.
Page 12 | For technical questions, please call | Item 69334 |