Harbor Freight Tools 93722 Unpacking, Battery Temperature Warning Battery Charger Safety

Page 5
Using the Battery Charger

Unpacking

When unpacking, check to make sure that the product is intact and undamaged, and all accessories listed below are included.

SDS-plus Cordless Hammer Drill 18V Rechargeable Battery Auxiliary Handle with Depth Gauge Quick Charge Battery Recharge Unit

If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.

Using the Battery Charger

NOTE: Battery will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) before the Battery will become fully charged.

Battery Temperature Warning:

WARNING: Battery explosion may cause serious personal or property injury including death. Charge the Battery only within a 50° to 100° F.temperature range. Lower temperatures may inhibit charging. Higher temperatures increase chance of battery failure, including explosion.

Battery Charger Safety:

1.Charge the Battery only with the included charger. Use of other chargers may cause battery failure including explosion.

2. Ensure that the Battery Charger is connected only to a 120 VAC,

60 Hz power supply that includes a circuit breaker.

REV 05/06

SKU 93722

For technical questions please call 1-800-444-3353

Page 5

Image 5
Contents 18V Cordless SDS Rotary Hammer For technical questions and replacement parts, please callSafety Warnings and Precautions SpecificationsRead all instructions before using this tool Save This ManualSKU REV 04/06 Unpacking Battery Temperature Warning Battery Charger SafetyInstalling the Battery Working with the Rechargeable BatteryCharging the Battery Special Drive System SDS Using the battery locks and Removing the BatteryFor use as a Hammer Drill OperationFor Use as a Drill Maintenance TroubleshootingBattery Pack loses charge quickly For Use as a HammerParts List Assembly Drawing