Harbor Freight Tools 41983 manual Operation

Page 11

Warning: Move the Switching Knob and Main Handle only when the motor is stopped. Attempting to move either the Switching Knob or Handle while the motor is engaged will result in abrupt bit rotation and can cause serious personal injury and/or property damage.

Warning: When moving the Switching Knob and Handle, make sure both actively click into the desired position. If not actively engaged, the Knob or Handle could slip out of position, resulting in unexpected tool performance.

•The front Switching Knob (22) has on one side- a symbol of a Hammer and a Drill. On the other side is a symbol of just a Hammer. The Main Handle (91) can be pointed either right or left. There are symbols for a Hammer and Drill on the left side and a symbol for a Drill only on the right side.

•To drill only, set the Switching Knob (22) so that the picture of the Hammer and Drill are facing forward. Turn the Main Handle (91) so that it points to the right at the Drill symbol (See Figure 2).

•To Hammer Drill, set the Switching Knob (22) so that the Hammer and Drill are facing forward. Turn the Main Handle (91) so that it points to the left at the Hammer and Drill symbol.

•To Chisel, set the Switching Knob (22) so that the picture of the Hammer only points forward. Turn the Main Handle (91) so that it points left to the Hammer and Drill symbol.

NOTE: Break Point (Bull) Bits and cold chisels are to be used when the Selector Switch is in the hammering position only. Using these bits/chisels with the Selector Switch in the hammer/drill position will result in unexpected tool performance.

Operation

1.Before plugging in the electrical cord, insert the desired bit and adjust the Auxiliary Handle and Depth Gauge to the desired positions (See earlier sections).

2.While keeping your finger off the “ON” trigger Switch (96), plug in the electrical cord.

3.When ready to use the Rotary Hammer, first depress the “ON” trigger Switch (96) and allow the unit to run without load for approximately one minute. This allows parts to become properly lubricated. Check to see if the operating tool sounds normal. Once the tool has been warmed up, it is ready for use.

4.To turn off the Rotary Hammer, release the trigger Switch (96).

SKU 41983

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SDS Rotary Hammer Work Area SpecificationsGeneral Safety Rules Save This ManualPersonal Safety Electrical SafetyTool Use And Care ServiceSpecific Safety Rules Grounded Tools Tools With Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools With Two Prong PlugsFeet SymbologyUnpacking Nameplate Extension Cord LengthInserting and Removing Drill Bits Setup and SettingsChanging the Settings Adjusting the Auxiliary HandleUsing the Depth Gauge Operation Maintenance Chart Maintenance Type Before After After Every INSPECTION, MAINTENANCE, and CleaningProblem Possible Causes Probable Solutions TroubleshootingWarranty Part Description ’ty Parts ListPlease Read the Following Carefully Parts ListRecord Product’s Serial Number Here Assembly DiagramSDS Marteau Rotatif SKU CaractéristiquesRegles DE Securite Espace DE TravailSecurite Personnelle Securite ElectriqueUtilisation ET Entretien DE L’OUTIL Entretien Regles DE Securite SpecifiquesSKU Fiche à Deux broches Mise À LA TerreLES Outils Mise À Laterre LES Outils Fiche À Trois Broches LES Outils À Double Isolation LES Outils AvecVoir L’IMAGE B Cordons DE RallongePieds Symboles’INTENSITÉ Longueur de la rallonge en piedsAssembler ET Réglage Installation ET Retrait DES ForetsDéballer Utiliser LA Jauge DE Profondeur Ajuster LA Manche AuxiliaireChanger LA Position FonctionnementType d’Entretien INSPÉCTION, Entretien ET NettoyageGarantie Problème Explication Possible SolutionGuide DE Dépannage Pièce Description ’ty LES PiècesLES Pièces Lisez S’IL Vous Plaît LE Suivant SoigneusementSchèma DU Produit

41983 specifications

Harbor Freight Tools is renowned for offering a wide range of high-quality tools at affordable prices. One of its standout products is the Harbor Freight Tools 41983, a versatile and reliable tool that has become a favorite among DIY enthusiasts and professionals alike.

The Harbor Freight Tools 41983 is a 12-ton hydraulic floor jack designed to offer maximum lifting capacity while maintaining portability and ease of use. Its robust construction ensures durability, making it suitable for both home and professional applications. The tool features a heavy-duty steel frame, which provides stability and strength, allowing it to lift vehicles, machinery, and other heavy objects with ease.

One of the main features of the 41983 is its quick lift design. This innovation allows users to raise a vehicle to the desired height quickly and efficiently, reducing the time spent on lifting tasks. The jack has a lifting range of approximately 5.5 inches to 22 inches, making it adaptable for various vehicle types, including cars and trucks.

Safety is a priority with the 41983, which includes a built-in safety overload system that prevents the jack from being used beyond its specified weight limit. This feature ensures that users remain secure while using the tool, providing peace of mind during lifting operations. Additionally, the jack contains a rubber saddle pad that protects the vehicles' frame from damage during use.

Another notable technology incorporated into the Harbor Freight Tools 41983 is its dual-pump piston design. This feature allows for faster lifting with fewer strokes compared to traditional jacks, making the lifting process quicker and more efficient. The ergonomic handle adds to the overall user experience, offering a comfortable grip and easier maneuverability, even in tight spaces.

In conclusion, the Harbor Freight Tools 41983 is a powerful and reliable hydraulic floor jack that combines efficiency, safety, and durability. With its impressive lifting capacity, quick lift design, safety features, and user-friendly design, it has proven to be an essential tool for anyone who regularly engages in lifting heavy objects. Whether you're a seasoned mechanic or a weekend DIYer, the 41983 is an excellent addition to any toolkit.
Top Page Image Contents