MODEL G0711 |
PLANISHING HAMMER |
INSTRUCTION SHEET |
This machine can cause serious personal injury if used incorrectly. To reduce this risk, read and understand these instructions before using!
The Model G0711 has a maximum operating pressure of 100 PSI. Exceeding this pres- sure can lead to an explosion, which may cause serious personal injury!
EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection while using this tool!
INJURY HAZARD!
Disconnect tool from air 
supply whenever servicing or adjusting machine!
CRUSHING HAZARD! |
|
Keep hands clear of ham- | |
mer at all times! |
|
Package Inventory |
|
Foot Switch, Hose, and Hammer Assembly | 1 |
1 | |
Hammer Head w/Coil Spring | 1 |
Die | 1 |
Die | 1 |
Die | 1 |
Hex Wrench 4mm | 1 |
Hex Wrench 5mm | 1 |
Specifications
Control Power | Pneumatic | ||
Throat Depth |
| 19 5⁄8" | |
Hammer/Die Opening (Usable) | |||
Maximum Opening (Loading/Unloading) | .......... 4" | ||
Maximum Workpiece Thickness | 5⁄64" (2mm) | ||
Hammer Speed | |||
Operating Air Pressure | |||
Maximum Air Pressure |
| 100 PSI | |
Air Inlet Size, Consumption | 1⁄4" NPT, 4 CFM | ||
Overall Dimensions | 23" L x 5 1⁄2" W x 24" H | ||
Weight |
| 35 lbs | |
|
|
|
|
|
|
|
|
Figure 1. Model G0711 Planishing Hammer.
NOTICE
If you have any questions about this machine, please call or write us.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Copyright © AUGUST, 2010 By Grizzly Industrial, Inc.
Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
(FOR MACHINES MFG. SINCE 7/10) #TR13227 Printed in CHINA