READ THIS MANUAL. This tool may cause per- sonal injury if used incorrectly. Read this manual for proper safety and operating instructions to reduce this risk.
WEAR EYE PROTECTION. This tool may throw small fragments during operation, which may cause serious eye injury. Always wear ANSI approved safety glasses or face shield to reduce your risk from this hazard.
WEAR A RESPIRATOR. This tool may produce fine dust during operation, which can cause respi- ratory injury if inhaled. Always wear a respirator NIOSH approved for the type of material being processed.
WEAR HEARING PROTECTION. This tool is very loud during operation and can cause per- manent hearing loss. To reduce your risk, always wear hearing protection, such as ear plugs or ear muffs while operating.
MAINTAIN SAFETY GUARDS. Your tool may be equipped with safety guards or other structural components designed to reduce the risk of injury during operation. Never modify or operate this tool with any guards or components removed or damaged.
KEEP CHILDREN AWAY. Children can injure themselves with this tool. Disconnect and lock the tool away when not in use.
AVOID ENTANGLEMENTS. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that may be caught in moving parts. Wear a hair covering to contain long hair.
USE CORRECT AIR PRESSURE. Exceeding the maximum PSI rating of this tool may cause unpre- dictable operation or bursting.
DISCONNECT AIR PRESSURE before servic- ing, changing accessories, or moving to another location. Never leave this tool unattended when connected to air.
SECURE TOOLING. Always verify tooling is secure before operation.
SHARP SURFACES. DO NOT place hands near the tooling surfaces when in operation.
REMOVE ADJUSTING KEYS AND WRENCHES AFTER USE. These tools become dangerous projectiles if left on the tool when it is started.
AVOID FLAMMABLES. Do not use around flam- mables that may be ignited by sparks.
SECURE WORK. Use clamps or a vise to hold work when practical. Otherwise, use both hands when shaping workpiece.
MAINTAIN TOOLS WITH CARE. Keep tools lubricated and clean for best and safest perfor- mance.
DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
CHECK FOR DAMAGED PARTS BEFORE USING. Check for binding and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect operation. Repair or replace damaged parts before operating.
USE GOOD LIGHTING. Keep work area well lighted. Dark work areas increase risk of injury.
AVOID UNINTENTIONAL OPERATION. Always disconnect air when not in use.
USE RECOMMENDED ACCESSORIES. Using improper accessories may increase risk of injury.
NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL WHILE UNSUPERVISED.
IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING TOOL. Seek formal training or research books or magazines that spe- cialize in pneumatic tools.
BE AWARE OF HOSE LOCATION. Hoses can become a tripping hazard when laid across the floor in a disorganized fashion.
DO NOT USE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL, OR WHEN TIRED.
Model G0711 (Mfg. Since 7/10) |