Know everything about the infiniti hair designer PRO by conair™
bangs
1.Select the vertical position for the straightener attachment.
2.Separate a section of hair about 1½" wide. Place dryer under the section of hair.
3.With a slight twisting motion of the wrist, turn the appliance upward to lift the roots and slide it slowly over the ends.
4.Hold for 5 to 10 seconds: the Nano Silver Tourmaline Ceramic™ and flocked detangling combs work best this way.
5.Repeat if necessary and finish with a shot of cool air on the section of hair for perfect hold.
Know everything about the infiniti hair designer PRO by conair™
Finishing with the concentrator
Once the straightening process is finished, set your style with a shot of ionic cool air to eliminate all traces of static electricity.
1.Detach the straightener attachment by pressing the 2 attachment release lock buttons on each side of the barrel and gently remove attachment.
2.‘Click’ the concentrator attachment into position on the appliance. Using the attachment release lock buttons, you can position the concentrator to desired angle for maximum styling control.
3.Turn on the Infiniti Hair Designer,™ set in low heat/speed setting position.
4.Press the
Curly Styles
Attach the soft finger diffuser to gently dry hair without blowing out curls.