4.OPERATING INSTRUCTIONS
Pedal #1
(Auto Program Selection)
Pedal #2 (Blackout)
Footswitch operation
The included footswitch provides quick access to preset colors, color change programs, and sound triggering via the onboard microphone on the Mini 4BAR™. Please see the chart, along with the set of instructions, below for further explanation.
1.Power on the fixture.
2.Connect the footswitch to the Mini 4BAR™ via the
Auto
Press pedal #1 to scroll through the auto programs and the static colors.
Blackout
Press pedal #2 to activate the Blackout function.
Sound
Press pedals #1 & #2 simultaneously to activate sound operation.
PEDAL | FUNCTION | |
|
|
|
| 1 x press | Auto |
|
|
|
| 2 x press | Auto |
|
|
|
| 3 x press | Red |
|
|
|
| 4 x press | Green |
1 (PRESET) |
|
|
5 x press | Blue | |
|
|
|
| 6 x press | Cyan |
|
|
|
| 7 x press | Magenta |
|
|
|
| 8 x press | Yellow |
|
|
|
| 9 x press | White |
|
|
|
2 (BLACKOUT) | - | Blackout |
|
|
|
The fixture will start up in sound mode when first powered ON.
The fixture will cycle through the auto programs and static colors very rapidly if pedal #1 is held down. This will seem like a very fast auto program. When releasing the pedal, the fixture will stop on the program in the cycle.
After activating Blackout, pedal #2 will NOT release the blackout. Press pedal #1 to activate Auto mode, or press pedals #1 & 2 simultaneously to activate Sound mode.
5. Appendix | 10 | 5/7/2010 1:21 PM |