Chauvet 60825-1:2007 manual Laser Emission Data, Laser Compliance Statement

Page 7

LASER EXPOSURE

Laser light - Avoid direct eye contact!

Further guidelines and safety programs for safe use of lasers can be found in the ANSI

Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the International Laser Display Association: www.laserist.org.

Laser Emission Data

LASER CLASSIFICATION

CLASS 3R

Green Laser Medium

DPSS Nd:YVO4, 532 nm

 

 

Blue Laser Medium

LD GaAlAs 450 nm, typical

 

 

Beam Diameter

<5mm at aperture

 

 

Pulse Data

All pulses < 4 Hz (>0.25 sec)

 

 

 

Divergence (each beam)

<2 mrad

 

 

Divergence (total light)

<160 degrees

 

 

Laser Power of Each

<5 MW

Beam from Aperture*

 

 

 

* As measured under IEC measurement conditions for classification.

Laser Compliance Statement

This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and US FDA/CDRH FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007. This laser device is classified 3R. (Class 3R is the international equivalent of US Class IIIa). No maintenance is required to keep this product in compliance with laser performance standards.

Scorpion™ Storm FXGB User Manual

7

12/12/2011

Image 7
Contents Page Contact Information Table of ContentsBefore YOU Begin Safety Instructions Non Interlocked Housing Warning Laser Safety NotesLaser Safety Label Reproduction Laser Compliance Statement Laser Emission DataProduct Overview IntroductionProduct Dimensions Mounting SetupAC Power Fuse ReplacementProper Usage DMX Data Cable Cable ConnectorsFixture Linking Data CablingSetting up a DMX Serial Data Link Pin to 5-Pin Conversion ChartMaster/Slave Fixture Linking Menu Functions Operating InstructionsNavigating the Control Panel DMX Channel SummaryDMX Channel Values Control ModeSetting the Starting Address Technical Support General TroubleshootingDMX Primer AppendixReturns Procedure Power Technical Specifications