Fixture Linking, Data Cabling, DMX DAT a Cable

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.

Important: Fixtures on a serial data link must be daisy chained in one single line. To comply with the EIA-485 standard no more than 32 devices should be connected on one data link. Connecting more than 32 fixtures on one serial data link without the use of a DMX optically-isolated splitter may result in deterioration of the digital DMX signal.

Maximum recommended serial data link distance: 500 meters (1640 ft.)

Maximum recommended number of fixtures on a serial data link: 32 fixtures

Data Cabling

To link fixtures together you must obtain data cables. You can purchase CHAUVET-certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.

DMX DAT A CABLE

Use a Belden© 9841 or equivalent cable which meets the specifications for EIA RS-485 applications. Standard microphone cables cannot transmit DMX data reliably over long distances. The cable will have the following characteristics:

2-conductor twisted pair plus a shield

Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor and shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft.

Nominal impedance 100 – 140 ohms

CABLE CONNECT ORS

Cabling must have a male XLR connector on one end and a female XLR connector on the other end.

DMX connector configuration

		COMMON
	1	DMX +
INPUT	3	DMX +
INPUT	3
	2	DMX -
		DMX -

1	Resistance 120
	ohm 1/4w between
3
	pin 2	(DMX -) and
2
	pin 3	(DMX +) of

the last fixture.

1	OUTPUT
3

	2	Termination reduces signal errors. To
	2	avoid signal transmission problems
		avoid signal transmission problems
		and interference, it is always
		advisable to connect a DMX signal
		terminator.

CAUTION Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other.

Intimidator™ Spot 150 User Manual

6/19/2009 9:08 AM

150 specifications

The Chauvet 150, also known as the Intimidator Spot 150, is a compact yet powerful moving head light that has become a staple in various lighting setups. Designed for mobile DJs, small venues, and event production, this fixture packs a punch despite its compact size, delivering professional features that elevate any performance.

One of the standout features of the Chauvet 150 is its impressive 12W LED light source, which produces bright and vibrant colors while maintaining energy efficiency. The fixture offers a color temperature of approximately 7,500K, providing a crisp and clear output that enhances any environment. With its adjustable beam angle, users can easily transition from narrow to wide coverage, making it suitable for both small stages and larger spaces.

The Chauvet 150 boasts advanced moving head technologies, including pan and tilt capabilities that allow for precise and dynamic positioning of the light beam. With a pan range of 540 degrees and a tilt range of 270 degrees, operators can easily create sweeping movements and fluid rotations, making it ideal for dynamic performances. The fixture also features built-in automated and sound-activated programs, enabling users to synchronize the lighting effects with the music.

Another key characteristic of the Chauvet 150 is its user-friendly interface. The fixture includes a digital display that simplifies setting adjustments and DMX mode selection. It supports multiple DMX channels, providing greater control over individual functions and effects. This versatility allows lighting designers to incorporate the fixture into more complex setups easily.

Durability is also a significant aspect of the Chauvet 150. Constructed with robust materials, this moving head light can withstand the rigors of touring and mobile applications. The fixture is lightweight and compact, making it easy to transport and set up for various events.

Additionally, the Chauvet 150 is designed with cooling efficiency in mind. The integrated fan system ensures quiet operation, making it suitable for environments where noise levels are a concern. This feature allows performers and audiences to enjoy the lighting effects without distraction.

In summary, the Chauvet 150 is a versatile and reliable moving head light that combines high performance with user-friendly technology. Its bright LED output, extensive movement range, and robust build quality make it an excellent choice for entertainment professionals looking to enhance their lighting productions. Whether for a small gig or a larger event, the Chauvet 150 delivers impressive results that elevate the overall experience.

Fixture Linking

Data Cabling

DMX DAT A CABLE

CABLE CONNECT ORS

OUTPUT

150 specifications