Chauvet 150 user manual Setup, Maximizing the life of your lamp, Lamp Installation

Page 7

3.SETUP

Lamp

 

You will need to install a lamp prior to the initial operation of the fixture. A HTI 150W discharge lamp

 

is included.

Warning!

When replacing the lamp, please wait 15 minutes after powering down to allow the unit to cool

 

down! Always disconnect from main power prior to lamp replacement.

 

Do not touch the envelope (glass area) of the bulb with bare hands. If this happens, clean the lamp

 

with alcohol and wipe it with a lint free cloth before installation.

Maximizing the life of your lamp

Note: To ensure the longest and most efficient use of the lamp always wait between 10 and 15 minutes before re-applying power after a shutdown.

Failure to do so could result in premature aging of the lamp and failure to the electronics that drive it.

Never turn off the power to the unit while the lamp is striking. Always wait 15 minutes after powering on the fixture before powering down. Turning off the lamp during striking may permanently damage the lamp.

Lamp Installation

Follow the instructions below for lamp installation.

1)Turn off power to fixture.

2)Loosen the 2 lamp covers knobs by turning counter-clockwise.

3)If there is a current lamp you are replacing, remove it now.

4)While using care not to allow the globe of the lamp to contact your bare skin, install the new lamp.

5)Replace lamp cover and tighten knobs.

Lamp cover screws

Intimidator™ Spot 150 User Manual

7

6/19/2009 9:08 AM

Image 7
Contents Snapshot Table of Contents Unpacking Instructions What is includedAC Power Before YOU BeginSafety Instructions Introduction FeaturesProduct Overview DMX Channel SummaryMaximizing the life of your lamp SetupLamp Installation LampLamp Alignment How-To Fuse ReplacementReplacing Gobos Gobo wheel Retaining ringCable Connect ORS Fixture LinkingData Cabling DMX DAT a CablePIN to 5- PIN Conversion Chart Setting up a DMX Serial Data LinkMaster/Slave Fixture Linking RI ENT AT I O N MountingRigging Manual Focus Navigating the Control Panel Operating InstructionsDMX Address Menu MapMenu Map Service Menu Map Additional Functions User ConfigurationsTo Restore ALL Setti NGS to T Heir Factory Default S Stand-Alone Mode Sound-Active, Auto ModeMaster/Slave Mode Master Sound, Master Auto DMX ModeDMX Channel Values Advance Mode 16-bit pan/tilt, 12-channelEffect Basic Mode 8-bit pan/tilt, 8-channel Appendix Setting T HE ST Arting AddressDMX Primer Symptoms Possible Solutions Intimidator Spot 150 Service Maintenance GuideWorld Wide Contact UsReturns Procedure General MaintenanceClaims Power Technical Specifications
Related manuals
Manual 18 pages 46.64 Kb Manual 1 pages 23.24 Kb

150 specifications

The Chauvet 150, also known as the Intimidator Spot 150, is a compact yet powerful moving head light that has become a staple in various lighting setups. Designed for mobile DJs, small venues, and event production, this fixture packs a punch despite its compact size, delivering professional features that elevate any performance.

One of the standout features of the Chauvet 150 is its impressive 12W LED light source, which produces bright and vibrant colors while maintaining energy efficiency. The fixture offers a color temperature of approximately 7,500K, providing a crisp and clear output that enhances any environment. With its adjustable beam angle, users can easily transition from narrow to wide coverage, making it suitable for both small stages and larger spaces.

The Chauvet 150 boasts advanced moving head technologies, including pan and tilt capabilities that allow for precise and dynamic positioning of the light beam. With a pan range of 540 degrees and a tilt range of 270 degrees, operators can easily create sweeping movements and fluid rotations, making it ideal for dynamic performances. The fixture also features built-in automated and sound-activated programs, enabling users to synchronize the lighting effects with the music.

Another key characteristic of the Chauvet 150 is its user-friendly interface. The fixture includes a digital display that simplifies setting adjustments and DMX mode selection. It supports multiple DMX channels, providing greater control over individual functions and effects. This versatility allows lighting designers to incorporate the fixture into more complex setups easily.

Durability is also a significant aspect of the Chauvet 150. Constructed with robust materials, this moving head light can withstand the rigors of touring and mobile applications. The fixture is lightweight and compact, making it easy to transport and set up for various events.

Additionally, the Chauvet 150 is designed with cooling efficiency in mind. The integrated fan system ensures quiet operation, making it suitable for environments where noise levels are a concern. This feature allows performers and audiences to enjoy the lighting effects without distraction.

In summary, the Chauvet 150 is a versatile and reliable moving head light that combines high performance with user-friendly technology. Its bright LED output, extensive movement range, and robust build quality make it an excellent choice for entertainment professionals looking to enhance their lighting productions. Whether for a small gig or a larger event, the Chauvet 150 delivers impressive results that elevate the overall experience.