User-Maintenance
Instructions
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Unplug the light from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.After Use, clean external surfaces of the tool with clean, moist cloth.
3.The individual LED lights are replace- able, but should only be done by a qualified service technician using the proper tools.
4.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
PARTS LIST
Part | Description | Qty |
1 | Lamp Assembly | 1 |
2 | Base | 1 |
3 | Knob | 1 |
ASSEMBLY DIAGRAM
1
2
3 
SKU 66274 | For technical questions, please call | Page 7 |