Chicago Electric 43972 REV 10/02 REV 06/04, Grounding/Voltage Warning, Assembly, Operation

Page 3

8.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.

9.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

10.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

11.Never look directly into the Spotlight.

12.Avoid touching the Lens as it may become hot during operation.

13.Do not dissassemble the Battery or remove any parts from the Battery and surrounding connections.

14.Do not allow the Spotlight to be exposed to fire or high heat as this may result in an explosion.

15.Disconnect power. Unplug charger when not in use.

16.Maintenance. For your safety, maintenance should be performed regularly by a qualified technician.

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Note: Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.

Grounding/Voltage Warning

Common household current is 110-120 volts. As long as the outlet used with the tool is rated from 110-120V there will be no complications using it with household receptacles. Plug the tool into a 110-120V properly grounded outlet protected by a 15-amp, dual element time delay or circuit breaker.

NEVER try to plug a 110-120V tool into a 220-240V circuit or serious complications and possible injury to the operator may occur. The plugs have different shapes to prevent this.

Assembly

Your Spotlight comes completely assembled.

Operation

To assist you with operating your Spotlight please refer to Figure 1 on page 5 and to the Parts List and Assembly Diagram located on pages 5 and 6.

Note: Always recharge the Spotlight within a 24 hour period after each use.

Note: This unit is equipped with an automatic shutoff. If the Battery’s power is running low, the unit will automatically stop operating to protect the battery. Charge the battery immediately.

#43972

REV 10/02

REV 06/04

Page 3

Image 3
Contents 43972 #43972 Read all instructions before using this productTechnical Specifications Model Serial No Purchase DateOperation AssemblyREV 10/02 REV 06/04 Grounding/Voltage WarningOn/Off with Locking Button ChargingCar Adapter Tripod AdapterParts Listing Description Quantity Unpacking#43972 REV 06/03 Please Read the Following Carefully Assembly Diagram