Panasonic SC-HC30 operating instructions Memory reset Initialization, Maintenance, Specifications

ENGLISH

Memory reset (Initialization)

When the following situations occur, reset the memory:

•There is no response when buttons are pressed.

•You want to clear and reset the memory contents.

To reset memory

Disconnect the AC power supply cord. (Wait for at least 3 minutes before proceeding to step 2.)

While pressing and holding down [8, POWER] on the main unit,

reconnect the AC power supply cord. “--------” appears on the display.

Release [8, POWER].

All the settings are returned to the factory preset. You will need to reset the memory items.

Maintenance

gPull out the power plug from the outlet for maintenance beforehand and then wipe it using a soft and dried cloth.

•When dirt is heavy, wring the cloth moistened in water tightly to wipe the dirt, and then wipe it with a dried cloth.

•Do not use solvents such as benzine, thinner, alcohol and detergent, which may deform the coating of the outer case.

•When using a chemical cloth, follow the precautions.

gCare on the CD lens

•Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty.

•Do not use the lens cleaner of the CD type.

Specifications

g AMPLIFIER SECTION RMS Output Power

Front Ch (both ch driven) 20 W per channel (6 Ω), 1 kHz, 10 % THD

Total RMS power40 W

FTC Output Power Stereo mode Front Ch (both ch driven)

15 W per channel (6 Ω), 20 Hz to 20 kHz, 10 % THD

Total FTC Stereo mode power		30 W
Phone jack
Terminal		Stereo, 3.5 mm (1/8") jack
Output level (CD, 1 kHz, -20 dB)		max. 0.2 mW + 0.2 mW, 32 Ω
Aux (Rear)
Terminal		Stereo, 3.5 mm (1/8") jack
g TUNER SECTION
Preset Memory		FM 30 stations
		AM 15 stations
Frequency Modulation (FM)
Frequency range	87.9 MHz to 107.9 MHz (200 kHz step)
	87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals		75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range		520 kHz to 1710 kHz (10 kHz step)

g DISC SECTION

Disc played [8 cm (3") or 12 cm (5")]

(1)CD-Audio (CD-DA)

(2)CD-R/RW (CD-DA, MP3)

(3)MP3*

* MPEG-1 Layer 3, MPEG-2 Layer 3

RQTX1066

14

Pick up
Wavelength			795 nm
Laser power			CLASS 1
Audio Output (Disc)
Number of channels			FL, FR, 2 channel
g SPEAKER SECTION
Type	1 way, 1 speaker system (Passive Radiator)
Speaker unit(s)
Full range		6.5 cm (2 1/2") Cone type x 1 / channel
Passive Radiator			8 cm (3") x 2 / channel
Impedance			6 Ω
g GENERAL
Power supply			AC 120 V, 60 Hz
Power consumption			29 W
Dimensions (W x H x D)			500 mm x 201 mm x 102 mm
			(19 11/16" x 7 29/32" x 4 1/32")
			(D = 69 mm (2 3/4") minimum)
Mass (Weight)			Approx. 2.8 kg (6.2 lb.)
Operating temperature range			0 °C to +40 °C
			(+32 °F to +104 °F)
Operating humidity range		35 % to 80 % RH (no condensation)
Power consumption in standby mode:			0.05 W (approx.)

•Specifications are subject to change without notice.

•Total harmonic distortion is measured by the digital spectrum analyzer.

14

14