Panasonic SC-HC30 operating instructions Wall mount instructions, Detach the stand from the unit

ENGLISH

Attaching the unit to a wall (Optional) (continued)

Wall mount instructions

•Before installation, turn the unit off and disconnect the AC power supply cord plug from the AC receptacle.

•Tighten screws firmly to prevent slack in each step.

1.Detach the stand from the unit.

 Unscrew the fixing screw A (2 pieces) at the bottom of the unit.  Slide the stand off the unit.

Keep the removed screws in a safe place.

Bottom of main unit

Stand

Soft blanket or cloth

Fixing screw A

2. Attach the wall bracket to the back of the unit.

Align both tabs on the wall bracket and the main unit, then slide it in until it clicks into place.

Wall bracket (bottom view)

	2
Tab
Rear of	1
main unit

Secure the wall bracket with fixing screw B (2 pieces). [Tightening torque: 1.2 Nm (57/64 lb-ft) to 1.5 Nm (1 7/64 lb-ft)]

Fixing screw B

3.Drive the mounting screws into the wall.

Measure and mark the position of the mounting screw C (2 pieces) and drive them into the wall.

•Use figures below for screw positions and measurements.

•Please install using both wall mounting screws.

•Use a level ruler to ensure both screws are level.

•Use a screw which is strong enough to support the weight of at least 20 kg (44 lb.).

Rear View

300 mm (11 13/16")

Space required

130 mm

(5 1/8")

74.8 mm

(2 15/16")

Wall

163 mm (6 7/16")

Mounting screw C

A length which supports the strength of 20 kg (44 lb.) or more must be kept for each screw.

	8 mm (5/16") to 9.5 mm (3/8")
4 mm	2.2 mm (3/32") to 2.8 mm (7/64")
(5/32")
	2.5 mm (3/32") to 3.5 mm (9/64")

RQTX1066

6

Space required

77.5 mm (3 1/16") 85.5 mm (3 3/8") 500 mm (19 11/16")

700 mm (27 9/16")

6