Safety advice / Use, Operation | Kompernass PWS 1200 guide

Cutting discs

Never use roughing or grinding discs for cutting!

JOnly use certified fibre-reinforced cutting or grinding discs approved for use at circumferen-

tial speeds of not less than 80 m/s.

mCaution! The disc continues to rotate after the device has been switched off. Do not attempt to slow it down by pressing on the side of the

disc.

JSecurely support the workpiece. Use clamps or a vice to grip the workpiece firmly. This is much safer than holding it in your hand.

JSwitch the device off and allow it to come to a complete standstill before you put it down.

JUnlock the ON/OFF switch immediately if a power failure occurs or the plug is pulled out of the mains socket. Place the switch in the OFF position. This prevents the device from being inadvertently started up again.

JUse the device for dry cutting or dry grinding only.

JThe auxiliary handle 5 must be in place whenever the device is being used.

JDo not work on materials containing asbestos. Asbestos is a known carcinogen.

A tip! Using the device safely.

m Danger! Always guide the

device through the workpiece

against the direction of rotation of the disc. If you work in the

other direction there is the risk of kickback. The device may be forced out of the cut.

JAlways switch on the device before placing it against the workpiece. After cutting or grind- ing, always lift the device from the workpiece before switching it off.

JWhen working always hold the device securely with both hands (see Fig. D). Always keep proper footing and balance.

JFor the best grinding performance move the de- vice evenly to and fro over the workpiece main-

Safety advice / Use

taining an angle of 15° to 30° (between grinding disc and workpiece).

JWhen working on inclined surfaces do not press the device hard down on to the work- piece. If the speed slows greatly, use less pres- sure. This will allow you to work more effective- ly and safely. If the device suddenly stops due to it becoming retarded or trapped, pull the mains plug from the socket immediately.

JCutting: Advance the device at an appropriate rate. Do not incline the cutting disc.

JRoughing, grinding and cutting discs get hot during use – allow them to cool fully before touching them.

JNever use the device for a purpose for which it was not intended.

JBefore you insert the mains plug into the socket, always check that the device is switched off.

JIf a dangerous situation arises, pull the mains plug immediately out of the mains socket. Ensure that the device and the mains plug are easily accessible and can be reached quickly in an emergency.

JWhen taking a break from your work, before carrying out any tasks on the device itself and when you are not using the device, always pull the mains plug out of the mains socket.

Always keep the device clean, dry and free of oil or grease.

JRemain alert at all times! Always watch what you are doing and proceed with caution. Do not use the device if you cannot concentrate or you are feeling unwell.

Use

Operation

Take note of the mains voltage! The voltage must agree with that shown on the device’s rating plate (equipment shown as 230 V can also be connected to 220 V).

GB/IE/CY 11

PWS 1200 specifications

The Kompernass PWS 1200 is a versatile power tool that combines efficiency and user-friendly design, making it a valuable addition to any workshop or tool collection. This compact yet powerful device is specifically engineered for a variety of woodworking tasks, as well as other applications where precise cutting is essential.

One of the main features of the PWS 1200 is its robust 1200-watt motor. This powerful engine delivers the necessary force to tackle tough materials, allowing users to cut through hardwoods and softwoods with ease. The motor's design ensures that it operates at optimal speeds while maintaining energy efficiency, making it suitable for both heavy-duty projects and lighter tasks.

The PWS 1200 also boasts a high-precision laser guide system. This technology allows users to achieve accurate cuts every time by providing a clear visual guide. The laser is easy to activate and can significantly reduce the margin for error, improving overall project quality. Additionally, the adjustable cutting depth feature allows users to make cuts of varying thicknesses, adding to the tool's versatility.

Another notable characteristic of the Kompernass PWS 1200 is its ergonomic design. The tool is equipped with a comfortable grip that minimizes fatigue during extended use. The lightweight construction further enhances maneuverability, making it easier for users to handle the tool without straining their muscles. Moreover, the user-friendly controls are designed to facilitate quick adjustments, making the PWS 1200 suitable for both beginners and experienced craftsmen.

The safety features of the PWS 1200 are also commendable. With a built-in safety switch and a removable protective guard, users can operate the tool with peace of mind, knowing that measures are in place to prevent accidental starts or injuries. The dust extraction port helps maintain a cleaner workspace by minimizing debris, enhancing visibility during cutting, and promoting a healthier working environment.

In summary, the Kompernass PWS 1200 is a powerful and efficient tool that stands out due to its strong motor, precision laser guiding technology, and ergonomic design. Its safety features, combined with its versatility and user-friendly controls, make it an ideal choice for a wide range of cutting tasks. Whether you are a hobbyist or a seasoned professional, the PWS 1200 is designed to meet your woodworking needs effectively and safely.