Safety Precautions, Securite, Description, Service

SAFETY PRECAUTIONS

The exclamation point within an equilateral triangle is intended to alert the user to presence of impor- tant operating and maintenance (servicing) instruc- tions in the literature accompanying the appliance.

SECURITE

Le point d'exclamation à l'intérieur d'un triangle équilatéral avertit l'utilisateur de la présence d'in- structions importantes d'utilisation et de mainte- nance dans la documentation accompagnant l'ap- pareil.

3 DESCRIPTION

MTS-2000 12-in (30-cm) feed-through mount and MTS-2030 15-in (40-cm) feed-through J-mount.

This indoor/outdoor mounting equipment is designed for fixed camera or camera housing installations up to 9 kg (20 lb) rated load.These models are made of lightweight alu- minum and feature welded construction, providing an extremely rigid camera mount. The MTS-2000 and MTS-2030 can be used with the VSE-2300 and VSE-2400 series camera housings. All mounts come fully assembled.

SICHERHEITSVORKENHRUNGEN

Das Ausrufezeichen in dem gleichseitigen Dreieck ist dazu da, den Benutzer auf wich-tige Inbetriebnahme- und Instandhaltungs-vorschriften hinzuweisen, die dem Gerät in Form einer Broschüre beigelegt sind.

PRECAUCIONES DE SEGURIDAD

El símbolo de exclamación dentro de un triángulo equilátero, se muestra con el objetivo de alertar al ususario de que instrucciones de operación y man- tenimiento importantes acompañan al equipo.

1 UNPACKING

Unpack carefully.This is mechanical equipment and should be handled with care.

Check for the following items:

•Verify the unit model number.

•Instructions for Use.

If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify Sanyo.The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

2 SERVICE

If the unit ever needs repair service, the customer should contact Sanyo.

4 INSTALLATION

1. Determine a secure wall mounting location.

WARNING:All mounts are designed to support a load only in a vertical direction. Mounts MUST be positioned as shown under

SPECIFICATIONS.

2. CAUTIONS:

a.For a secure installation, use four 8-mm (5/16-in) diameter fasteners (not included). Use stainless steel or zinc plated fasteners.

b.If bolts are used, they should extend through the mounting surface and be secured with flat washers, lock washers, and nuts on the opposite side. Each bolt must have a minimum pull-out strength of 200 kg (450 lb).

c.If studs are used, they should be anchored in concrete or welded to a steel backer plate. Each stud must have a minimum pull out strength of 200 kg (450 lb).

d.If the wall mount is attached to wood or to a blind structure (with no access to the rear), each fastener must have a minimum pull-out strength of at least 200 kg (450 lb).

3.Locate the four holes or stud locations using the flange as

atemplate (four holes equally spaced on a 69.9-mm

(2-3/4-in bolt circle).

4.Feed wires through the large hole in the flange or through the slot on the surface where the camera housing mounts.

5.Install the mount using bolts or studs at least 8-mm (5/16-in) in diameter.

6.To mount the camera or camera housing:

a.Mount camera with a 1/4-20 bolt and lock washer (not furnished) in the center hole of the adjustable head.

b.Mount housings with three 1/4-20 bolts and lock washers (not furnished).

c.Lock mount head in position by using the supplied 1/8-inch long-arm hex wrench to tighten screws.

MTS-2000, MTS-2030 specifications

The Sanyo MTS-2030 and MTS-2000 are two notable models in the world of television technology, showcasing the evolution of video display systems during their time. Known for their innovative features, these models reflect the advancements in television technology that took place in the late 20th century.

The MTS-2030, a more advanced version, was designed to provide viewers with a superior watching experience. It brought forward several cutting-edge technologies such as Multi-Carrier Modulation, which allowed for clearer reception of multiple channels simultaneously. This technology was essential during a time when television broadcasting was transitioning from analog to more complex digital signals. The MTS-2030 also featured a 20-inch screen, a significant size for its era, ensuring that users enjoyed a more immersive viewing experience.

Another standout characteristic of the MTS-2030 was its enhanced color reproduction capabilities. Utilizing Sanyo’s proprietary color tuning technology, it delivered vibrant and accurate colors, making movies and shows come to life. The model also included various connectivity options, allowing users to connect additional devices such as VCRs and gaming consoles.

On the other hand, the Sanyo MTS-2000, while slightly less advanced than the MTS-2030, offered robust performance with a strong emphasis on durability and practicality. With its 19-inch screen, it was built to cater to both casual viewers and avid fans alike. The MTS-2000 featured a user-friendly interface with intuitive controls, making it accessible for users of all ages.

Both models were equipped with mono audio output, a common feature of their time, which provided decent sound quality albeit lacking the stereo experience that later models would come to offer. Despite this, they both succeeded in entertaining families and enhancing viewing experiences in homes during a period of great technological transition.

In summary, the Sanyo MTS-2030 and MTS-2000 represent a significant moment in television technology, showcasing features like Multi-Carrier Modulation, robust color reproduction, and improved screen sizes. Their designs emphasized user experience, setting a foundation for future innovations in television technology. These models exemplify Sanyo’s commitment to quality and performance, leaving a lasting impact on consumers at the time.