Service

11.Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

12.Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

13.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

14.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

15.Use clamps or other practical way t o secure and support the workpiece t o a stable platform. Holding the work by hand or against your body is unstable and may lead t o loss of control.

16.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

17. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

18.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

20.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

22. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

23 . Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

24.,When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.

9564CV, 9560CV, 9561CV, 9565CV, 9563CV specifications

The Makita 9563CV, 9565CV, 9561CV, 9560CV, and 9564CV are powerful angle grinders designed to meet the demands of both professionals and serious DIY enthusiasts. Each model boasts advanced features, state-of-the-art technology, and a robust build, making them essential tools for cutting, grinding, and polishing a variety of materials.

The Makita 9563CV model features a high-performance 12-amp motor that offers exceptional grinding speed and the ability to handle tough materials with ease. It is equipped with a dust-proof switch to prolong the life of the tool, and its labyrinth construction helps to seal internal components from dust and debris, improving durability. The ergonomic design ensures comfort during prolonged use, and the adjustable side handle allows for increased control.

In contrast, the 9565CV model takes it up a notch with a powerful 13-amp motor, delivering even higher performance levels for demanding tasks. This model includes a variable speed control feature, allowing users to adjust the RPM based on the work at hand, which enhances precision in various applications. It also integrates an electronic current limiter for overload protection, safeguarding the tool during heavy-duty grinding or cutting tasks.

The Makita 9561CV, known for its compact design, retains a potent motor while offering excellent maneuverability in tight spaces. This model is favored for its lightweight construction, making it perfect for overhead work or projects that require extended periods of use. The powerful motor ensures high efficiency, while its built-in anti-restart function prevents accidental starts, providing an added layer of safety.

The 9560CV model is revered for its straightforward operation and rugged durability. It features a rubberized grip for better handling, which reduces vibration and ensures comfort throughout use. The tool’s reinforced shaft and gears contribute to its longevity, making it a reliable choice for heavy-duty applications.

Finally, the Makita 9564CV is designed for versatility, featuring a 14-amp motor perfect for a wide range of tasks from metalworking to masonry. It also includes a spindle lock for easy wheel changes, significantly reducing downtime on the job. The integrated kickback protection enhances safety and reduces the risk of tool damage.

In summary, each of these Makita models brings unique strengths to the table while maintaining exceptional power, durability, and user comfort, solidifying their place in the toolbox of professionals and contractors worldwide.