Makita 9563CV, 9560CV, 9564CV, 9561CV, 9565CV instruction manual WARN1NG, Repair and maintenance

Page 9

WARN1NG:

It should never be necessary to force the tool. The weight of the tool applied adequate pressure. Forcing and excessive pressurecould cause dangerous when wheel breakage.

Continued use of a worn-out wheel may result in wheel explosion and serious personal

injury. Depressed center wheel should not be used after it has been worn down to 75 mm (3") in diameter for Models 9560CV, 9563CV or 90 mm (3-1/2") for Models 9561CV, 9564CV and 9565CV in diameter. Use of the wheel after this point is unsafe and it should be removed from service and rendered unusable by intentional destruction.

The tools equipped with electronic function are easy to operate because of the following features.

Electronic speed control for obtainingconstant speed

Possible to get fine finish, because the rotating speed is kept constantly even under the loaded condition.

Soft start feature

Safety and soft start because of suppressed starting shock.

Overload protector

When the tool would be employed over the admissible load, it will stop automatically to protect the motor and wheel. When the load will come to the admissible level again, the tool can be started automaticallv.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and unpluggedbefore attempting to perform inspection or maintenance.

Repair and maintenance

The tool and its opening vents for cooling air have to be always kept clean. When the foreign matters clog such parts. they have to be taken off.

I

Inhalationvent

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust- ment should be performed by Makita Authorizedor Factory Service Centers, always using Makita replacementparts.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 115 mm 100 mmGeneral Safety Rules USAooz-i Service Specific Safety Rules Symbols Switch action Speed adjusting dialFunctional Description Assembly Installing and removing wheel coverRemoving wheel cover Operation Installing or removingthe depressed center wheelWARN1NG Repair and maintenance@ Wheelcover Accessories@ Depressed center wheels @ Multi-disc@ Wire bevel brush @ Wire cup brush8Wheel guard assembly @ Rubberpad For abrasive discKnotted-Twist Wire cup brush Full Cable Twist Wire brush wheel@ Cut-off wheel Lock nut wrenchG47 Brush Holder Armature Assy Makita Limed ONE Year Warranty

9564CV, 9560CV, 9561CV, 9565CV, 9563CV specifications

The Makita 9563CV, 9565CV, 9561CV, 9560CV, and 9564CV are powerful angle grinders designed to meet the demands of both professionals and serious DIY enthusiasts. Each model boasts advanced features, state-of-the-art technology, and a robust build, making them essential tools for cutting, grinding, and polishing a variety of materials.

The Makita 9563CV model features a high-performance 12-amp motor that offers exceptional grinding speed and the ability to handle tough materials with ease. It is equipped with a dust-proof switch to prolong the life of the tool, and its labyrinth construction helps to seal internal components from dust and debris, improving durability. The ergonomic design ensures comfort during prolonged use, and the adjustable side handle allows for increased control.

In contrast, the 9565CV model takes it up a notch with a powerful 13-amp motor, delivering even higher performance levels for demanding tasks. This model includes a variable speed control feature, allowing users to adjust the RPM based on the work at hand, which enhances precision in various applications. It also integrates an electronic current limiter for overload protection, safeguarding the tool during heavy-duty grinding or cutting tasks.

The Makita 9561CV, known for its compact design, retains a potent motor while offering excellent maneuverability in tight spaces. This model is favored for its lightweight construction, making it perfect for overhead work or projects that require extended periods of use. The powerful motor ensures high efficiency, while its built-in anti-restart function prevents accidental starts, providing an added layer of safety.

The 9560CV model is revered for its straightforward operation and rugged durability. It features a rubberized grip for better handling, which reduces vibration and ensures comfort throughout use. The tool’s reinforced shaft and gears contribute to its longevity, making it a reliable choice for heavy-duty applications.

Finally, the Makita 9564CV is designed for versatility, featuring a 14-amp motor perfect for a wide range of tasks from metalworking to masonry. It also includes a spindle lock for easy wheel changes, significantly reducing downtime on the job. The integrated kickback protection enhances safety and reduces the risk of tool damage.

In summary, each of these Makita models brings unique strengths to the table while maintaining exceptional power, durability, and user comfort, solidifying their place in the toolbox of professionals and contractors worldwide.
Top Page Image Contents