Makita 9503BH instruction manual Installing or removing depressed center wheel

Page 5

Installing side grip (auxiliary handle)

Screw the side grip on the tool securely. The side grip can be installedon either side of the tool, whichever is convenient.

Installing or removing depressed center wheel

CAUTION :

Always be sure that the tool is switched off the wheel.

Mount the inner flange onto the spindle. Fit the wheel on over the inner flange and screw the lock nut onto the spindle.

5

and unplugged before installing or removing

 

Depressed

 

center wheel

I

Inner flange

To tighten the lock nut, press the shaft lock firmly so that the spindle cannot re- volve, then use the lock nut wrench and securely tighten clockwise.

_.

-Lock-nut-wrench

To remove the wheel, follow the installation procedure in reverse.

5

Image 5
Contents 115 mm 4-1/2MODEL 9503BH Safety Instructions Page Additional Safety Rules Installing or removing depressed center wheel Slide switch Maintenance Accessor IES Disc per pkg For abrasive disc Disc Grinder ‘ktM MaKitaueztkuc