Installing the Auxiliary Handle
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or without the Auxiliary Handle properly installed.
7.The Auxiliary Handle may be installed in one of three positions, on either side or on top of the Gear Housing (26). (See Photo.)
8.Screw the threaded end of the Auxil- iary Handle into the selected position. Tighten securely before beginning work.
Functions
Auxiliary Handle (25)
Alternative Mounting |
| |
Positions for Auxiliary | Spindle | |
Handle | Lock | |
Magnesium | Button | |
(24) | ||
Alloy Cover | ||
|
Carbon Brush Cap (45)
Wheel Guard (7)
Quick Release Adjusting Nut (4)
Wheel Guard Quick Release (6)
This
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Installing a Grinding Wheel
1.Before installing a grinding wheel, review the warnings on pages 5 - 7. The Grinding Wheel MUST be:
•rated to at least 8000 RPM.
•no larger than 7” in diameter.
•fitted with a 7/8” round arbor hole.
•3/8” thick or less.
•a type of grinding wheel suitable for surface grinding, not edge grinding.
•dry and clean.
•proven undamaged by inspec- tion and by the
2.Press in and hold the Spindle Lock
Button (24) to prevent the Spindle (8) from turning.
3.Remove the Outer Flange (1). Keep the Inner Flange (3) in position on the Spindle.
SKU 97588 | For technical questions, please call | Page 13 |