Chicago Electric 93179 operating instructions Specifications, Unpacking, Assembly

Page 6

Specifications

Input

120 V~, 60 Hz, 15 A

Motor Speed

6500 RPM

Power Cord

82”L x 14AWG 2 prong polarized

Construction

Molded ABS Motor Housing

Cast Aluminum Gear Housing

 

Wheel Diameter

9” with 5/8” x 11TPI Arbor Spindle

optional 7/8” Arbor Adaptor included

 

Overall

18-1/2”L x 4-3/8”W x 5-1/2”H

Dimensions

 

Unpacking

When unpacking, check to make sure that the

product is intact and undamaged.

If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.

Assembly

You must install the Wheel Guard (3) before using your Angle Grinder

tab

tab

press down,

 

then rotate

Positioning the Wheel Guard (3)

1.Align the tabs on the Wheel Guard (3) with the indents in the underside of the Gear Housing (19) and press the Guard into place as shown above.

Tighten the Screw (5)

in the Guard Clamp (4)

2.Rotate the Wheel Guard (3) into position as shown above.

3.Tighten the Screw (5) in the Guard Clamp (4) to hold the Wheel Guard (3) firmly in place.

You must install the Side Handle (24) before using your Angle Grinder.

1.You can install the Side Handle (24) in either the left or right side or the top of the Gear Housing (19).

2.Decide which position is best for you, providing the firmest grip while working. Pry out the Rubber

Plug (23) which is covering the threaded hole you have selected. Place the Rubber Plug in a safe place where you can find it again if you need it.

NOTE: The wheel guard

is shown in the correct final position.

Installing the Side Handle (24)

3.Align the threaded end of the Side Handle (24) with the threaded hole in the Gear Housing (19) and screw it in clockwise until it is tight.

NOTE: Periodically check to be sure the handle remains tight. Never try to reposition the Side Handle while the tool is running.

 

 

REV 10h

Page 6

For technical questions, please call 1-800-444-3353.

SKU 93179

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Set up and Operating Instructions For technical questions or replacement parts, please callSave This Manual Safety Warnings PrecautionsPersonal Safety For technical questions, please callService Specific Safety RulesTool Use and Care See Table a GroundingOutlets for 2-Prong Plug See Table a For technical questions, please callTable a 25’ 50’ 75’ 100’ 150’Specifications AssemblyUnpacking About Power Grinders and Grinding Wheels Rotating the Back Handle Using the Angle Grinder Maintenance and Inspection Inspecting the Carbon BrushesParts List Part DescriptionAssembly Drawing SKU For technical questions, please callLimited 90 DAY Warranty

93179 specifications

The Chicago Electric 93179 is a versatile and powerful tool that caters to various woodworking and metalworking needs, making it a popular choice among both DIY enthusiasts and professional tradespeople. This particular model stands out for its combination of robust features, innovative technologies, and user-friendly characteristics that enhance efficiency and precision in various applications.

One of the main highlights of the Chicago Electric 93179 is its potent motor, which typically operates at 1500 watts. This high-performance motor enables the tool to quickly cut through various materials, including wood, plastic, and metal, making it suitable for a wide range of tasks, from crafting to remodeling projects. The powerful motor ensures that users can rely on the tool for heavy-duty operations without worrying about overheating or performance drop-off over time.

The 93179 comes equipped with a variable speed control feature, allowing users to adjust the cutting speed based on the specific material and task at hand. This level of customization is invaluable, as it helps to achieve clean cuts and minimize material waste. The ability to fine-tune speed not only enhances the quality of the work but also increases the overall longevity of the tool itself.

Another notable characteristic of the Chicago Electric 93179 is its ergonomic design. The lightweight yet durable construction enhances maneuverability, making it easier for users to operate the tool for extended periods without experiencing fatigue. The well-placed grip handles provide added comfort and control, which is essential for precision cutting applications.

Additionally, the 93179 features a dust management system that minimizes debris and keeps the work area clean. This system is particularly beneficial in environments where visibility and cleanliness are crucial for safe operation. By reducing dust generation, users can also prolong the life of the tool and maintain optimal performance.

In terms of versatility, the Chicago Electric 93179 supports a variety of attachments and blades, which further enhances its utility. From jigsaw blades to rotary cutting bits, the tool adapts well to different projects, allowing users to switch tasks seamlessly without requiring additional equipment.

Overall, the Chicago Electric 93179 is a reliable and multifunctional tool, characterized by its powerful performance, adjustable features, ergonomic design, and versatility. It stands as a top choice for anyone looking to invest in a durable tool that can meet diverse cutting challenges with ease.
Top Page Image Contents