Craftsman 152.22018 owner manual Carton Contents

Page 7

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS (Fig. C)

This Bench Grinder will require a minimal amount of assembly. A 10mm and 13mm open end wrench is provided for mounting the Tool Rest Assemblies and the Spark Arrestor Assemblies.

Remove all of the parts from the shipping box and lay them on a clean work surface. Compare the items to Fig. C, verify that all items are accounted for before discarding the shipping box.

! WARNING

If any parts are missing, do not attempt to plug in the power cord and turn “ON” the Bench Grinder. The

Fig. C

Bench Grinder can only be turned “ON” after all the parts have been obtained and installed correctly.

The following items are to be provided in the shipping box:

A.Grinder

B.Quench tray

C.Wheel dresser

D.Eyeshield assembly

E.Left tool rest assembly (not shown)

F.Right tool rest assembly

G.Special Wrench

A

F

B

D

C

G

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents In. Bench Grinder Warranty Table of ContentsProduct Specifications General Safety Instructions Safety InstructionsKeep Protective Guards in Place and in Working Order Guidelines for Extension Cords Safety InstructionsProhibited in Canada Grounding InstructionsAvailable Accessories Accessories and AttachmentsStock Number Carton Contents 10B 10A Know Your Bench GrinderSpark Arrestors Fig. F Assembly InstructionsPermanent Mounting EYE Shields Fig. GQuench Tray Work Light Fig. HGrinding Wheels Using the Wheel Dresser Fig. JOperating the Bench Grinder Do not Ever Grind on the SidesDust Port Fig. N Changing the Grinding Wheel Fig. KLubrication Maintenance of the Bench GrinderTroubleshooting CleaningParts IN. Professional Bench Grinder Parts ListIN. Professional Bench Grinder Parts List 10-IN. Professional Bench Grinder Parts List 10-IN. Professional Bench Grinder Parts List Page Get it fixed, at your home or ours
Top Page Image Contents