KNOW YOUR BENCH GRINDER
6
4 | 7 |
13
5
10B | 10A |
9
2 
8 | 11 |
14 
13
1.WHEEL GUARD - Covers the grinding wheels and protects against accidental contact.
2.WHEEL COVER - Covers the grinding wheels and provides access for routine maintenance.
3.MOTOR HOUSING - Contains the electrical motor.
4.EYESHIELD MOUNTS - Supports the eyeshields.
5.EYESHIELDS - Protective Lexan
6.FLEXIBLE WORK LIGHT - Provides assistance to the operator for grinding operations.
7.SPARK ARRESTORS - Prevents hot sparks and debris from contacting the operator.
8.TOOL REST ADJUSTABLE SUPPORTS - Lets the operator position the tool rest closer to the wheel as the wheel decreases in diameter due to wear.
9.TOOL RESTS - Used to support the workpiece that is being ground. Adjustable to provide angled surfaces.
10.A) GRINDING WHEEL 120 GRIT - Used to remove light material from workpiece.
10.B) GRINDING WHEEL 60 GRIT - Used to remove heavy material from workpiece.
11.ON / OFF SWITCH - Used to turn “ON” and turn “OFF” the grinder.
12.WHEEL DRESSER - Used to clean and smooth surface of the 8" Grinding Wheel (not shown).
13.QUENCH TRAY - Used to cool workpiece after grinding.
14.MOUNTING PAD - Used to secure the grinder to a workbench or suitable work surface.
15.GRINDING WHEEL IDENTIFICATION LABEL - Provides information on wheel size, grit and maxi- mum RPM. Must be left on to distribute the load of tightening the Lock Nuts (not shown).
16.ARBOR BUSHING - Used when wheels have an oversized wheel bore (not shown).
17.FLANGES - Used to secure the grinding wheels to the grinder and distribute the load of the Lock Nuts (not shown).
18.LOCK NUT - Used to secure the grinding wheels to the grinder (not shown).
8