Refer to them often Use them to instruct others

ADDITIONAL SAFETY RULES FOR

GRINDERS

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

1. DO NOT OPERATE THIS MACHINE until it is assembled and installed according to the instructions.

2.OBTAIN ADVICE FROM YOUR SUPERVISOR, instructor, or another qualified person if you are not familiar with the operation of this machine.

3.FOLLOW ALL WIRING CODES and recommended electrical connections.

4.USE THE GUARDS WHENEVER POSSIBLE. Check to see that they are in place, secured, and working correctly.

5.ALWAYS USE THE BLOTTER (furnished) and wheel flanges to mount the grinding wheels on the grinder shaft.

6.USE ONLY GRINDING WHEELS suitable for the speed of the machine.

7.USE ONLY GRINDING WHEELS that have a bore exactly equal to the arbors of the machine. Never attempt to machine an undersized wheel to fit an arbor.

8.DO NOT USE A GRINDING WHEEL THAT VIBRATES. Dress the grinding wheel, replace it, or replace the bearings of the shaft.

9.INSPECT GRINDING WHEELS BEFORE START- ING THE MACHINE for cracks or chips. REPLACE DAMAGED GRINDING WHEELS immediately.

10.ADJUST SPARK GUARDS close to the grinding wheel, and re-adjust as the wheel wears down.

11.ADJUST TOOL RESTS close to the grinding wheel (1/8" (3.8mm) separation or less). Tighten the tool rest securely to prevent shifting positions.

12.STAND TO ONE SIDE before turning the machine “ON”.

13.NEVER GRIND ON A COLD GRINDING WHEEL. Run the grinder at idle speed for one full minute before applying the workpiece.

14.NEVER START THE MACHINE with the workpiece against the grinding wheel.

15.NEVER GRIND NEAR FLAMMABLE GAS OR LIQUIDS. Sparks can create a fire or an explosion.

16.AVOID AWKWARD OPERATIONS AND HAND POSITIONS where a sudden slip could cause a hand to move into the grinding wheel.

17.KEEP ARMS, HANDS, AND FINGERS away from the grinding wheel.

18.HOLD WORK FIRMLY against the tool rests.

19.DRESS THE GRINDING WHEEL on the face only. Dressing the side of the grinding wheel could cause it to become too thin for safe use.

20.GRIND A WORKPIECE using the face of the grinding wheel only.

21.NEVER APPLY COOLANT directly to the grinding wheel. Coolant can weaken the bonding strength of the grinding wheel and cause it to fail. Dip the workpiece in water to cool it.

22.DO NOT TOUCH the ground portion of a workpiece until it has cooled sufficiently. Grinding creates heat.

23.TURN THE MACHINE “OFF” AND DISCONNECT THE MACHINE from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs.

24..TURN THE MACHINE “OFF”, disconnect the machine from the power source, and clean the table/work area before leaving the machine. If your machine has a switch lock-out feature, LOCK THE SWITCH IN THE “OFF” POSITION to prevent unauthorized use.

25.ADDITIONAL INFORMATION regarding the safe and proper operation of this tool is available from the Power Tool Institute, 1300 Summer Avenue, Cleveland, OH 44115-2851. Information is also available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201. Please refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machines and the U.S. Department of Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS.

Refer to them often

and use them to instruct others.

GR250 specifications

The Delta GR250 is a versatile and robust entry in the world of industrial machinery, known for its blend of innovative technologies and user-friendly design. This machine is designed to meet the demanding needs of various sectors, including manufacturing, agriculture, and logistics.

At the heart of the Delta GR250 is its powerful engine, delivering impressive performance and efficiency. The advanced powertrain allows for smooth operation even in challenging environments, making it suitable for heavy-duty tasks. Its compact design does not compromise its strength; instead, it allows for maneuverability in tight spaces, a crucial advantage in busy work sites.

One of the standout features of the Delta GR250 is its cutting-edge automation technologies. Equipped with state-of-the-art sensors and intelligent control systems, the GR250 can perform tasks with remarkable precision while minimizing human intervention. This automation results in increased productivity as well as consistent quality in operations, which are essential in today’s competitive landscape.

The GR250 also incorporates advanced data analytics tools that provide real-time insights into machine performance. Operators can monitor metrics such as fuel efficiency, load weight, and operational hours to make informed decisions. This data-driven approach not only helps in optimizing operations but also plays a significant role in predictive maintenance, reducing downtime and operational costs.

In terms of user experience, the Delta GR250 features an ergonomic cabin designed for operator comfort. With adjustable seating, intuitive controls, and excellent visibility, operators can work longer hours effectively without fatigue. Further enhancing safety, the machine is equipped with multiple safety features, including load sensors and emergency stop systems, ensuring secure operation at all times.

The Delta GR250 stands out for its adaptability across various applications. Whether used in construction sites, agricultural fields, or warehousing, it offers the flexibility needed to handle different tasks. This versatility, combined with its reliability and efficient performance, makes the Delta GR250 a valuable asset for businesses looking to enhance productivity and streamline operations.

In summary, the Delta GR250 is a powerful machine that embodies the future of industrial equipment through its advanced technologies, user-centric design, and exceptional adaptability, making it a top choice for various industrial applications.