Delta GR250 instruction manual Assembly, Tool Rests, Spark Guards, EYE Shields

Page 7

ASSEMBLY

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE TOOL TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.

TOOL RESTS

1. Assemble left tool rest (A) Fig. 3, to left tool rest arm

(B), as shown, and fasten with one 5/16-18x3/4" knob

(C) and 5/16" flat washer (D). Assemble the remaining

tool rest in the same manner. Do not completely tighten

hardware at this time.

A

C

2. Assemble left tool rest assembly (D) Fig. 4, to the

inside of left wheel guard (E), and fasten with two 5/16-

18x5/8" screws (F) and 5/16" flat washers (G) as shown.

3. Assemble right tool rest assembly to the inside of

right wheel guard and fasten with two 5/16-18x5/8" hex

head screws and 5/16" flat washers in the same manner.

4. Each tool rest assembly (D) Fig. 4, is adjustable so it

can be positioned slightly below the centerline of the

wheel and as close to the grinding wheel as possible,

giving maximum support to the piece that is being

ground. Always maintain a distance of 1/8" or less

between the grinding wheel and the inside edge of the

tool rest. As the wheels wear down, the tool rest should

be adjusted accordingly. When the tool rest is positioned

correctly, tighten hardware (C) and (F). Freehand

grinding without the use of a tool rest should always be

done on the lower quarter of the wheel.

SPARK GUARDS

The spark guard (A) Fig. 5, is mounted to the side of each wheel guard, using a 1/4-20x1/4" hex head screw (B) and 1/4" flat washer (C) as shown. NOTE: The tab (D)

Fig. 5, on the side of the spark guard (A), must be placed in slot (E), before attaching the spark guard

(A)to the grinder. The spark guard (A) should be adjusted as close as possible to the grinding wheel so that sparks never strike the operator’s hand. As the wheels wear down, the spark guard (A) should be adjusted accordingly.

D

B

Fig. 3

G

D

CF E

Fig. 4

C

AB

D

E

Fig. 5

EYE SHIELDS

Your grinder is supplied with two eye shields for operator protection.

WARNING: ALWAYS WEAR EYE PROTECTION. To assemble the eye shields, proceed as follows:

1.Place the eye shield (A) on the spark guard as shown in Fig. 6.

A

Fig. 6

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Variable Speed Grinder / Sharpener General Safety Rules Refer to them often Use them to instruct others Additional Safety Rules for GrindersMotor Specifications Power ConnectionsGrounding Instructions Extension Cords Unpacking and CleaningGrinder Parts EYE Shields AssemblyTool Rests Spark GuardsFastening Grinder to Supporting Surface Locking Switch OFF PositionDressing a Grinding Wheel Variable Speed ControlFlexible Lamp Grinding WheelsWrench Storage Changing Grinding WheelsPage Two Year Limited Warranty Accessories PARTS, Service or Warranty Assistance

GR250 specifications

The Delta GR250 is a versatile and robust entry in the world of industrial machinery, known for its blend of innovative technologies and user-friendly design. This machine is designed to meet the demanding needs of various sectors, including manufacturing, agriculture, and logistics.

At the heart of the Delta GR250 is its powerful engine, delivering impressive performance and efficiency. The advanced powertrain allows for smooth operation even in challenging environments, making it suitable for heavy-duty tasks. Its compact design does not compromise its strength; instead, it allows for maneuverability in tight spaces, a crucial advantage in busy work sites.

One of the standout features of the Delta GR250 is its cutting-edge automation technologies. Equipped with state-of-the-art sensors and intelligent control systems, the GR250 can perform tasks with remarkable precision while minimizing human intervention. This automation results in increased productivity as well as consistent quality in operations, which are essential in today’s competitive landscape.

The GR250 also incorporates advanced data analytics tools that provide real-time insights into machine performance. Operators can monitor metrics such as fuel efficiency, load weight, and operational hours to make informed decisions. This data-driven approach not only helps in optimizing operations but also plays a significant role in predictive maintenance, reducing downtime and operational costs.

In terms of user experience, the Delta GR250 features an ergonomic cabin designed for operator comfort. With adjustable seating, intuitive controls, and excellent visibility, operators can work longer hours effectively without fatigue. Further enhancing safety, the machine is equipped with multiple safety features, including load sensors and emergency stop systems, ensuring secure operation at all times.

The Delta GR250 stands out for its adaptability across various applications. Whether used in construction sites, agricultural fields, or warehousing, it offers the flexibility needed to handle different tasks. This versatility, combined with its reliability and efficient performance, makes the Delta GR250 a valuable asset for businesses looking to enhance productivity and streamline operations.

In summary, the Delta GR250 is a powerful machine that embodies the future of industrial equipment through its advanced technologies, user-centric design, and exceptional adaptability, making it a top choice for various industrial applications.
Top Page Image Contents