Delta 23-592 instruction manual Assembly, Tool Rests, Spark Guards, EYE Shields

Page 5

ASSEMBLY

TOOL RESTS

1.Assemble adjustable tool rest (A) Fig. 3, to left side of tool rest arm (B), as shown, and fasten with one 5/16- 18x3/4" hex head screw (C) and 5/16" lockwasher (D). Assemble the remaining tool rest to the right side of the other tool rest arm in the same manner. Do not completely tighten hardware at this time.

2.Assemble left tool rest assembly (D) Fig. 4, to the inside of left wheel guard (E), and fasten with two 5/16- 18x5/8" screws (F) and 3/4" flat washers (G) as shown.

3.Assemble right tool rest assembly to the inside of right wheel guard and fasten with two 5/16-18x5/8" hex head screws and 3/4" flat washers in the same manner.

4.Each tool rest assembly (D) Fig. 4, is adjustable so it can be positioned slightly below the centerline of the wheel and as close to the grinding wheel as possible, giving maximum support to the piece that is being ground. Always maintain a distance of 1/8" or less between the grinding wheel and the inside edge of the tool rest. As the wheels wear down, the tool rest should be adjusted accordingly. When the tool rest is positioned correctly, tighten hardware (C) and (F). Freehand grinding without the use of a tool rest should always be done on the lower quarter of the wheel.

SPARK GUARDS

The spark guard (A) Fig. 5, is mounted to the side of each wheel guard, using the 1/4-20x1/4" hex head screw (B) and 1/4" flat washer (C) as shown. NOTE: The tab (D)

Fig. 5, on the side of the spark guard (A), must be placed in slot (E), before attaching the spark guard

(A)to the grinder. The spark guard (A) should be adjusted as close as possible to the grinding wheel so that sparks never strike the operator’s hand. As the wheels wear down, the spark guard (A) should be adjusted accordingly.

A D C B

Fig. 3

G

D

E

C

F

Fig. 4

B

CD

E

A

Fig. 5

EYE SHIELDS

Your grinder is supplied with two eye shields for operator protection. NOTE: ALWAYS WEAR EYE PROTECTION. To assemble the eye shields, proceed as follows:

1.Place the eye shield on the spark guard as shown in Fig. 6.

Fig. 6

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Bench Grinder W/Lamp Always Wear EYE Protection Safety RulesReplace a Cracked Wheel Immediately Additional Safety Rules for GrindersUnpacking and Cleaning Tool Rests AssemblySpark Guards EYE ShieldsPower Connections Connecting Tool to Power SourceMotor Specifications Fastening Grinder to Supporting SurfaceMinimum Gauge Extension Cord Extension CordsDressing a Grinding Wheel Flexible LampStarting and Stopping Grinder Accessories PARTS, Service or Warranty Assistance

23-592 specifications

Delta 23-592 is an advanced aircraft developed for the modern aviation landscape, merging cutting-edge technology with exceptional performance characteristics. Designed primarily for mid-range commercial operations, this aircraft has garnered attention for its efficiency and versatility.

One of the standout features of the Delta 23-592 is its state-of-the-art aerodynamics. The aircraft employs a sleek fuselage design complemented by winglets that enhance lift and reduce drag. This design minimizes fuel consumption, making it an environmentally friendly option for airlines and helping reduce operational costs.

The aircraft is powered by dual turbofan engines specifically engineered for optimal performance and reliability. These engines are known for their quiet operation and low emissions, aligning with the industry's increasing focus on sustainability. The combination of advanced engine technology and aerodynamic efficiency allows the Delta 23-592 to achieve impressive range capabilities while maintaining excellent speed performance.

Inside the cabin, the Delta 23-592 offers a spacious and comfortable environment for passengers. The interior is designed with ergonomics in mind, featuring wide seats, ample legroom, and large windows that provide a bright and airy atmosphere. Advanced climate control systems ensure a pleasant onboard experience, regardless of external weather conditions.

In terms of technology, the aircraft is equipped with an advanced avionics suite that enhances operational safety and efficiency. This system includes automated flight controls, real-time data analytics, and enhanced navigation systems that contribute to precise flight management. Additionally, the Delta 23-592 is compatible with the latest satellite communication technologies, allowing for seamless connectivity during flights.

Another notable aspect of the Delta 23-592 is its emphasis on maintenance and reliability. The aircraft is constructed using durable materials that require minimal maintenance, ensuring that airlines can maximize their operational uptime. The modular design of various components also simplifies servicing, allowing for quicker turnaround times between flights.

Furthermore, the Delta 23-592 is designed with adaptability in mind. It can be configured for various payload capacities, from passenger configurations to cargo transport, making it a versatile choice for different markets.

Overall, the Delta 23-592 stands out as a robust and modern aircraft that combines innovative technologies with practical features, making it well-suited for the evolving demands of the aviation industry.
Top Page Image Contents