Delta 23-592 Connecting Tool to Power Source, Fastening Grinder to Supporting Surface

Page 6

2.Align the holes in the eye shield with the holes in the spark guard and place the eye shield spacer (A) Fig. 7, in the space in the spark guard as shown.

3.Insert the eye shield bolt (A) Fig. 8, through the hole in the eye shield (B), eye shield spacer (C), and spark guard (D).

4.Place an 1/4" flat washer (E) Fig. 8, onto the end of the eye shield bolt and fasten the eye shield knob (F) to the end of the eye shield bolt.

5.Assemble the other eye shield in the same manner.

A

Fig. 7

E

CF A

B

D

Fig. 8

FASTENING GRINDER TO SUPPORTING SURFACE

IF DURING OPERATION THERE IS ANY TENDENCY FOR THE GRINDER TO TIP OVER, SLIDE OR “WALK,” THE GRINDER MUST BE SECURED TO THE SUPPORTING SURFACE USING FASTENERS (NOT SUPPLIED) THROUGH THE TWO HOLES (A) Fig. 9, IN THE GRINDER BASE.

A A

Fig. 9

CONNECTING TOOL TO POWER SOURCE

POWER CONNECTIONS

A separate electrical circuit should be used for your tools. This circuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3-prong grounding type plugs and 3-hole receptacles which accept the tool’s plug. Before connecting the motor to the power line, make sure the switch is in the “OFF” position and be sure that the electric current is of the same characteristics as indicated on the tool. All line connections should make good contact. Running on low voltage will damage the motor.

MOTOR SPECIFICATIONS

Your tool is wired for 120 volt, 60 HZ alternating current. Before connecting the tool to the power source, make sure the switch is in the “OFF” position. The motor provides a no-load speed of 3450 RPM.

GROUNDING INSTRUCTIONS

WARNING: THIS TOOL MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Bench Grinder W/Lamp Safety Rules Always Wear EYE ProtectionAdditional Safety Rules for Grinders Replace a Cracked Wheel ImmediatelyUnpacking and Cleaning Spark Guards AssemblyTool Rests EYE ShieldsMotor Specifications Connecting Tool to Power SourcePower Connections Fastening Grinder to Supporting SurfaceExtension Cords Minimum Gauge Extension CordFlexible Lamp Starting and Stopping GrinderDressing a Grinding Wheel Accessories PARTS, Service or Warranty Assistance

23-592 specifications

Delta 23-592 is an advanced aircraft developed for the modern aviation landscape, merging cutting-edge technology with exceptional performance characteristics. Designed primarily for mid-range commercial operations, this aircraft has garnered attention for its efficiency and versatility.

One of the standout features of the Delta 23-592 is its state-of-the-art aerodynamics. The aircraft employs a sleek fuselage design complemented by winglets that enhance lift and reduce drag. This design minimizes fuel consumption, making it an environmentally friendly option for airlines and helping reduce operational costs.

The aircraft is powered by dual turbofan engines specifically engineered for optimal performance and reliability. These engines are known for their quiet operation and low emissions, aligning with the industry's increasing focus on sustainability. The combination of advanced engine technology and aerodynamic efficiency allows the Delta 23-592 to achieve impressive range capabilities while maintaining excellent speed performance.

Inside the cabin, the Delta 23-592 offers a spacious and comfortable environment for passengers. The interior is designed with ergonomics in mind, featuring wide seats, ample legroom, and large windows that provide a bright and airy atmosphere. Advanced climate control systems ensure a pleasant onboard experience, regardless of external weather conditions.

In terms of technology, the aircraft is equipped with an advanced avionics suite that enhances operational safety and efficiency. This system includes automated flight controls, real-time data analytics, and enhanced navigation systems that contribute to precise flight management. Additionally, the Delta 23-592 is compatible with the latest satellite communication technologies, allowing for seamless connectivity during flights.

Another notable aspect of the Delta 23-592 is its emphasis on maintenance and reliability. The aircraft is constructed using durable materials that require minimal maintenance, ensuring that airlines can maximize their operational uptime. The modular design of various components also simplifies servicing, allowing for quicker turnaround times between flights.

Furthermore, the Delta 23-592 is designed with adaptability in mind. It can be configured for various payload capacities, from passenger configurations to cargo transport, making it a versatile choice for different markets.

Overall, the Delta 23-592 stands out as a robust and modern aircraft that combines innovative technologies with practical features, making it well-suited for the evolving demands of the aviation industry.
Top Page Image Contents