Operation

Turning the Bench Grinder ON

and OFF

Speed Control and

On/Off Knob (31)

1.Insert the Plug (36) into an electrical outlet.

2.Turn the speed control Knob (31) clockwise to turn the motor ON and adjust its speed.

3.To turn OFF, turn the Knob counter- clockwise until it clicks.

4.Do not leave the bench grinder run- ning unattended. Turn off the tool when not in use.

Grinding with the Grinding

Wheel

WARNING: The grinding wheel can fly apart and cause injury.

Grinding wheels must always be checked for cracks or imperfections. This is done with the “ring test”. Tap the wheel gently near the outer rim with the handle of a screwdriver. You should hear a clear bell-like ring. If a dull thud occurs, do not use the wheel. The wheel may be damaged and could come apart during opera- tion.

1.Bring the workpiece into the wheel gently, without jarring.

2.When grinding high speed steels such as drill and tool bits, avoid high temperature buildup as this can affect the temper of the steel.

3.For small workpieces such as drill bits or chisels, avoid applying pres- sure to the wheel at a high angle that could cause the workpiece to become lodged between the tool rest and the wheel.

SKU 43533

For technical questions, please call 1-800-444-3353.

Page 5