Harbor Freight Tools 3150 INSPECTION, MAINTENANCE, and Cleaning, Do not use damaged equipment

Page 11

4.To attach the Handle (part #16), screw the threaded portion of the Handle into either the right or left side threaded mounting hole located on the sides of the Gear Box (part #15). (See Figure D.)

5.To operate the Angle Grinder, plug the Power Cord (part #50) into a grounded, 120 volt, electrical outlet.

6.Grip the Angle Grinder firmly with both hands. Then turn the Power Switch (part #39) to its “ON” position and allow the Grinding Wheel to rotate to its fullest speed. (See Figure D.)

7.Do not force the rotating Grinding Wheel into the object being ground. Apply moderate pressure, allowing the Grinding Wheel to rotate freely without being forced.

8.After the grinding job is completed, turn the Power Switch (part #39) to its “OFF” position. Then unplug the Power Cord (part #50) from its electrical outlet.

INSPECTION, MAINTENANCE, AND CLEANING

1. WARNING! Make sure the Power Switch (part #39) of the Angle Grinder is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

2.BEFORE EACH USE, inspect the general condition of the Angle Grinder. Check for loose screws, misalignment or binding of moving parts, cracked or broken Grinding Wheel, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

3.PERIODICALLY, the two Carbon Brushes (part #41) should be checked. If the Carbon Brushes are simply dirty, they may be cleaned by rubbing them with a pencil eraser. If the Carbon Brushes are excessively worn, they must both be replaced at the same time. To clean or replace the Carbon Brushes, unscrew and remove the Brush Caps (part #42) to expose the Carbon Brushes. Pull out both Carbon Brushes from their Brush Holders (part #40), and insert two new Carbon Brushes in the Brush Holders. Then, replace the Brush Caps.

(See Figure D.)

4.Use only a clean cloth and mild detergent to clean the body of the

Angle Grinder. Do not use solvents. Do not immerse any part of the tool in liquid.

SKU 03150

PAGE 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents For technical questions, please call 2 Angle GrinderWork Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesSKU Grounded Tools Tools with Three Prong Plugs GroundingSee Figure C Extension CordsDouble Insulated Tools Tools with TWO Prong Plugs See Figure C, nextFigure C SymbologySee Figure D Assembly and Operating InstructionsUnpacking Do not use damaged equipment INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Parts ListAssembly Diagram

3150 specifications

Harbor Freight Tools has established itself as a go-to source for affordable and reliable tools, catering to both DIY enthusiasts and professionals alike. Among its extensive product line, the Harbor Freight Tools 3150 is a standout offering that showcases a blend of functionality, convenience, and advanced technology, making it an essential tool for various applications.

The Harbor Freight Tools 3150 is a portable, gasoline-powered generator designed to deliver reliable power when and where you need it. With a robust engine, this generator is capable of producing a maximum output of 3,150 running watts and 3,800 starting watts, making it suitable for powering tools and appliances during outdoor events, job sites, or in emergency situations.

One of the key features of the 3150 is its compact design, which enhances portability. It is equipped with ergonomic handles and solid wheels, making it easy to transport. Weighing only a fraction of the more cumbersome generators on the market, this model strikes a balance between power and manageability.

In terms of fuel efficiency, the 3150 is engineered to maximize runtime, allowing users to operate their equipment for extended periods without the need for frequent refueling. With a generous fuel tank capacity, it provides a continuous power supply during critical moments when electricity is not readily available.

The generator includes multiple outlets, such as 120V AC outlets and 12V DC ports, facilitating versatile connections for various tools and devices. This flexibility ensures that users can operate everything from power tools to recreational equipment all from a single power source.

Safety is another priority in the design of the Harbour Freight Tools 3150. It features overload protection to prevent damage to both the generator and the devices being powered. Additionally, the generator is equipped with a low oil shutdown function, which automatically turns off the engine when oil levels are dangerously low, safeguarding against potential engine failure.

In summary, the Harbor Freight Tools 3150 is a reliable and versatile generator that provides ample power, impressive portability, and safety features that cater to the needs of its users. Ideal for various applications, it embodies the quality and affordability the Harbor Freight brand is known for, making it an excellent addition to any tool collection. Whether powering tools on a job site or providing backup during outages, the 3150 stands ready to deliver dependable performance.
Top Page Image Contents