Harbor Freight Tools 3150 operating instructions Sku

Page 6

8.Avoid unintentional starting. Make sure you are prepared to begin work before turning on this tool.

9.Do not force this tool. This tool will do the work better and safer at the speed and capacity for which it was designed. Do not force the rotating Grinding Wheel (not included) into the object being ground. Apply moderate pressure, allowing the Grinding Wheel to rotate freely without being forced.

10.WARNING! Never install a carbide tipped or steel circular saw blade

for use on this tool. Never install a wood carving blade, carving disc with saw chain cutters, or a cutting carving disc on this tool.

11.For safest operation, it is recommended that only these accessories be used with this tool: Abrasive Cut-Off Discs and Wheels, Flap Wheels, Wire Brushes, Wire Wheel Brushes.

12.Never lay this tool down until the Rotating Grinding Wheel has come to a complete stop. The Rotating Pad can grab the surface and pull the tool out of your control.

13.Never leave this tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

14.Always unplug this tool from its electrical outlet before performing inspec- tion, maintenance, or cleaning procedures.

15. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of Cali- fornia) to cause cancer, birth defects or other reproductive harm. Some ex- amples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

16. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

SKU 03150

PAGE 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 2 Angle Grinder For technical questions, please callSave this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyTool USE and Care Specific Safety Rules ServiceSKU Grounding Grounded Tools Tools with Three Prong PlugsSee Figure C, next Extension CordsDouble Insulated Tools Tools with TWO Prong Plugs See Figure CSymbology Figure CAssembly and Operating Instructions UnpackingSee Figure D INSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentParts List Please Read the Following CarefullyAssembly Diagram

3150 specifications

Harbor Freight Tools has established itself as a go-to source for affordable and reliable tools, catering to both DIY enthusiasts and professionals alike. Among its extensive product line, the Harbor Freight Tools 3150 is a standout offering that showcases a blend of functionality, convenience, and advanced technology, making it an essential tool for various applications.

The Harbor Freight Tools 3150 is a portable, gasoline-powered generator designed to deliver reliable power when and where you need it. With a robust engine, this generator is capable of producing a maximum output of 3,150 running watts and 3,800 starting watts, making it suitable for powering tools and appliances during outdoor events, job sites, or in emergency situations.

One of the key features of the 3150 is its compact design, which enhances portability. It is equipped with ergonomic handles and solid wheels, making it easy to transport. Weighing only a fraction of the more cumbersome generators on the market, this model strikes a balance between power and manageability.

In terms of fuel efficiency, the 3150 is engineered to maximize runtime, allowing users to operate their equipment for extended periods without the need for frequent refueling. With a generous fuel tank capacity, it provides a continuous power supply during critical moments when electricity is not readily available.

The generator includes multiple outlets, such as 120V AC outlets and 12V DC ports, facilitating versatile connections for various tools and devices. This flexibility ensures that users can operate everything from power tools to recreational equipment all from a single power source.

Safety is another priority in the design of the Harbour Freight Tools 3150. It features overload protection to prevent damage to both the generator and the devices being powered. Additionally, the generator is equipped with a low oil shutdown function, which automatically turns off the engine when oil levels are dangerously low, safeguarding against potential engine failure.

In summary, the Harbor Freight Tools 3150 is a reliable and versatile generator that provides ample power, impressive portability, and safety features that cater to the needs of its users. Ideal for various applications, it embodies the quality and affordability the Harbor Freight brand is known for, making it an excellent addition to any tool collection. Whether powering tools on a job site or providing backup during outages, the 3150 stands ready to deliver dependable performance.
Top Page Image Contents