Grounding Instructions

direction of rotation of the blade or cutter only.

20.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.

To prevent electric shock

and death from incorrect grounding wire connection Read and follow these instructions:

equipment-grounding conductor to a live terminal.

4.Check with a qualified electrician or service personnel if the grounding instructions are not completely under- stood, or if in doubt as to whether the tool is properly grounded.

5.Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug.

6.Repair or replace damaged or worn cord immediately.

110-120 V~ Grounded Tools: Tools

with Three Prong Plugs

1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment- grounding conductor and a ground- ing plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

2.Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electri- cian.

3.Improper connection of the equip- ment-grounding conductor can re- sult in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equip- ment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the

Grounding

125 V~ 3-Prong Plug and Outlet

(for up to 125 V~ and up to 15 A)

7.This tool is intended for use on a cir- cuit that has an outlet that looks like the one illustrated above in 125 V~

3-Prong Plug and Outlet. The tool has a grounding plug that looks like the plug illustrated above in 125 V~ 3-Prong Plug and Outlet.

8.The outlet must be properly installed and grounded in accordance with all codes and ordinances.

9.Do not use an adapter to connect this tool to a different outlet.

Bench Grinder

For technical questions, please call 1-800-444-3353.

Page 5