Harbor Freight Tools 45707 operating instructions Keep ALL Guards in Place and in Working Order

3.GROUND THIS MACHINE. The electrical power cord for this product is equipped with a grounded, 3-prong plug. Make sure this product is always plugged into a grounded, 3-hole electrical receptacle.

4.MAKE SURE THE SWITCH IS IN THE “OFF” POSITION BEFORE PLUGGING IN THE POWER CORD.

5.DO NOT ABUSE THE POWER CORD. Do not yank the power cord to discon- nect it from the electrical receptacle. Do not move this machine with the power cord in the outlet. Keep the cord away from heat, oil, and sharp edges.

6.KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.

7.REMOVE ADJUSTING KEYS AND WRENCHES. Check to make sure all ad- justing tools are removed from this product before turning it on.

8.MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this product in or near damp or wet areas. Do not expose this product to rain. Keep work area well lit. Make sure there is adequate surrounding work space. Use this product in a well ventilated area. Do not operate this product in the presence of flammable liquids, gasses, or dust. To avoid accidental electric shock, do not let your body come in contact with grounded surfaces such as pipes, radiators, ranges, etcetera.

9.DO NOT FORCE THE EQUIPMENT. This Cutter/Grinder will do the work better and safer at the speed and capacity for which it was designed.

10.AVOID UNINTENTIONAL STARTING. Make sure you are prepared to begin work before turning the start switch on.

11.NEVER ATTEMPT TO REMOVE MATERIAL STUCK IN THE MOVING PARTS OF THIS MACHINE WHILE THE MACHINE IS PLUGGED IN AND RUNNING.

12.MAKE SURE THIS MACHINE IS PLACED SECURELY ON A FLAT, LEVEL, STURDY WORKBENCH CAPABLE OF SUPPORTING THE WEIGHT OF THE MACHINE, WORKPIECE(S), TOOLS, ETCETERA.

13.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemical treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

(California Health & Safety Code § 25249.5, et seq.)

SKU 45707 For technical questions, please call 1-800-444-3353. Page